On Fri, Jun 09, 2017 at 11:59:33AM +0900, Hoegeun Kwon wrote:
It should be connected to OF graph between fimd and dsi.I need more explanation why this is needed. What happens without this?
Add the OF graph between fimd and dsi.
What issue is fixed here?
What about Exynos5250 and Exynos5420? I think we do not have a board in
mainline using FIMD but maybe this should be added just for correct
hardware description?
Best regards,
Krzysztof
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 590ee44..22d523f 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -311,6 +311,19 @@
iommus = <&sysmmu_fimd0>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ fimd_to_dsi: endpoint {
+ remote-endpoint =
+ <&dsi_to_fimd>;
+ };
+ };
+ };
};
dsi_0: dsi@11C80000 {
@@ -326,6 +339,19 @@
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_to_fimd: endpoint {
+ remote-endpoint =
+ <&fimd_to_dsi>;
+ };
+ };
+ };
};
sysmmu_fimd0: sysmmu@11E20000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 497a947..773d392 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -193,6 +193,19 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_to_fimd: endpoint {
+ remote-endpoint =
+ <&fimd_to_dsi>;
+ };
+ };
+ };
};
camera {
@@ -715,6 +728,19 @@
iommus = <&sysmmu_fimd0>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ fimd_to_dsi: endpoint {
+ remote-endpoint =
+ <&dsi_to_fimd>;
+ };
+ };
+ };
};
tmu: tmu@100C0000 {
--
1.9.1