Re: [PATCH 3/3] power: supply: Add support MAX1721x battery monitor
From: Sebastian Reichel
Date: Thu Jun 08 2017 - 08:48:43 EST
Hi Alex,
On Fri, Jun 02, 2017 at 10:06:29AM +0300, Alex A. Mihaylov wrote:
> Add support for battery monitor MAX1721x (power_supply class).
> Maxim Semiconductor MAX1721x Standalone Fuel Gauge battery monitor.
> MAX17211 used for singlecell, MAX17215 for multicell batteryes.
> ---
> drivers/power/supply/Kconfig | 14 ++
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/max1721x_battery.c | 357 ++++++++++++++++++++++++++++++++
> 3 files changed, 372 insertions(+)
> create mode 100644 drivers/power/supply/max1721x_battery.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index da54ac88f0..d431d6f8aa 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -268,6 +268,20 @@ config BATTERY_MAX17042
> with MAX17042. This driver also supports max17047/50 chips which are
> improved version of max17042.
>
> +config BATTERY_MAX1721X
> + tristate "MAX17211/MAX17215 standalone gas-gauge"
> + depends on W1
> + select W1_SLAVE_MAX1721X
> + select REGMAP_W1
> + help
> + MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
> + in handheld and portable equipment. MAX17211 used with single cell
> + battery. MAX17215 designed for muticell battery. Both them have
> + 1-Wire (W1) host interface.
> +
> + Say Y here to enable support for the MAX17211/MAX17215 standalone
> + battery gas-gauge.
> +
> config BATTERY_Z2
> tristate "Z2 battery driver"
> depends on I2C && MACH_ZIPIT2
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 3789a2c06f..c785d05e02 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
> obj-$(CONFIG_BATTERY_DA9150) += da9150-fg.o
> obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
> obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
> +obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
> obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
> obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
> obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
> diff --git a/drivers/power/supply/max1721x_battery.c b/drivers/power/supply/max1721x_battery.c
> new file mode 100644
> index 0000000000..aa0effec3d
> --- /dev/null
> +++ b/drivers/power/supply/max1721x_battery.c
> @@ -0,0 +1,357 @@
> +/*
> + * 1-wire client/driver for the Maxim Semicondactor
> + * MAX17211/MAX17215 Standalone Fuel Gauge IC
> + *
> + * Copyright (C) 2017 OAO Radioavionica
> + * Author: Alex A. Mihaylov <minimumlaw@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/param.h>
param?
> +#include <linux/pm.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/idr.h>
> +
> +#include "../../w1/w1.h"
This will conflict with public w1 interface patch
https://www.spinics.net/lists/kernel/msg2524566.html
This patch should be on top of that patch.
> +#include "../../w1/slaves/w1_max1721x.h"
Let's merge those defines into the driver. They
are not used anywhere else.
> +#define DEF_DEV_NAME_MAX17211 "MAX17211"
> +#define DEF_DEV_NAME_MAX17215 "MAX17215"
> +#define DEF_DEV_NAME_UNKNOWN "UNKNOWN"
> +#define DEF_MFG_NAME "MAXIM"
> +
> +struct max17211_device_info {
> + struct device *dev;
> + struct power_supply *bat;
> + struct power_supply_desc bat_desc;
> + struct device *w1_dev;
> + struct regmap *regmap;
> + /* battery design format */
> + unsigned int rsense; /* in tenths uOhm */
> + char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
> + char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
> + char SerialNumber[13]; /* see get_sn_str() later for comment */
> +};
> +
> +static inline struct max17211_device_info *
> +to_device_info(struct power_supply *psy)
> +{
> + return power_supply_get_drvdata(psy);
> +}
> +
> +static int max1721x_battery_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct max17211_device_info *info = to_device_info(psy);
> + unsigned int reg = 0;
> + int ret = 0;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_PRESENT:
> + /*
> + * POWER_SUPPLY_PROP_PRESENT will always readable via
> + * sysfs interface. Value return 0 if battery not
> + * present or unaccesable via W1.
> + */
> + val->intval =
> + regmap_read(info->regmap, MAX172XX_REG_STATUS,
> + ®) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
> + break;
> + case POWER_SUPPLY_PROP_CAPACITY:
> + ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, ®);
> + val->intval = max172xx_percent_to_ps(reg);
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = regmap_read(info->regmap, MAX172XX_REG_BATT, ®);
> + val->intval = max172xx_voltage_to_ps(reg);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, ®);
> + val->intval = max172xx_capacity_to_ps(reg);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_AVG:
> + ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, ®);
> + val->intval = max172xx_capacity_to_ps(reg);
> + break;
> + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
> + ret = regmap_read(info->regmap, MAX172XX_REG_TTE, ®);
> + val->intval = max172xx_time_to_ps(reg);
> + break;
> + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
> + ret = regmap_read(info->regmap, MAX172XX_REG_TTF, ®);
> + val->intval = max172xx_time_to_ps(reg);
> + break;
> + case POWER_SUPPLY_PROP_TEMP:
> + ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, ®);
> + val->intval = max172xx_temperature_to_ps(reg);
> + break;
> + /* We need signed current, so must cast info->rsense to signed type */
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, ®);
> + val->intval =
> + max172xx_current_to_voltage(reg) / (int)info->rsense;
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_AVG:
> + ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, ®);
> + val->intval =
> + max172xx_current_to_voltage(reg) / (int)info->rsense;
> + break;
> + /*
> + * Strings already received and inited by probe.
> + * We do dummy read for check battery still available.
> + */
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, ®);
> + val->strval = info->DeviceName;
> + break;
> + case POWER_SUPPLY_PROP_MANUFACTURER:
> + ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, ®);
> + val->strval = info->ManufacturerName;
> + break;
> + case POWER_SUPPLY_PROP_SERIAL_NUMBER:
> + ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, ®);
> + val->strval = info->SerialNumber;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static enum power_supply_property max1721x_battery_props[] = {
> + /* int */
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_CAPACITY,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CHARGE_AVG,
> + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
> + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
> + POWER_SUPPLY_PROP_TEMP,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CURRENT_AVG,
> + /* strings */
> + POWER_SUPPLY_PROP_MODEL_NAME,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> + POWER_SUPPLY_PROP_SERIAL_NUMBER,
> +};
> +
> +static int get_string(struct max17211_device_info *info,
> + uint16_t reg, uint8_t nr, char *str)
> +{
> + unsigned int val;
> +
> + if (!str || !(reg == MAX1721X_REG_MFG_STR ||
> + reg == MAX1721X_REG_DEV_STR))
> + return -EFAULT;
> +
> + while (nr--) {
> + if (regmap_read(info->regmap, reg++, &val))
> + return -EFAULT;
> + *str++ = val>>8 & 0x00FF;
> + *str++ = val & 0x00FF;
> + }
> + return 0;
> +}
> +
> +/* Maxim say: Serial number is a hex string up to 12 hex characters */
> +static int get_sn_string(struct max17211_device_info *info, char *str)
> +{
> + unsigned int val[3];
> +
> + if (!str)
> + return -EFAULT;
> +
> + if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
> + return -EFAULT;
> + if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
> + return -EFAULT;
> + if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
> + return -EFAULT;
> +
> + snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
> + return 0;
> +}
> +
> +/* Model Gauge M5 Register Memory Map access */
> +static const struct regmap_range max1721x_regs_allow[] = {
> + /* M5 Model Gauge Algorithm area */
> + regmap_reg_range(0x00, 0x23),
> + regmap_reg_range(0x27, 0x2F),
> + regmap_reg_range(0x32, 0x32),
> + regmap_reg_range(0x35, 0x36),
> + regmap_reg_range(0x38, 0x3A),
> + regmap_reg_range(0x3D, 0x3F),
> + regmap_reg_range(0x42, 0x42),
> + regmap_reg_range(0x45, 0x46),
> + regmap_reg_range(0x4A, 0x4A),
> + regmap_reg_range(0x4D, 0x4D),
> + regmap_reg_range(0xB0, 0xB0),
> + regmap_reg_range(0xB4, 0xB4),
> + regmap_reg_range(0xB8, 0xBE),
> + regmap_reg_range(0xD1, 0xDA),
> + regmap_reg_range(0xDC, 0xDF),
> + /* Factory settins area */
> + regmap_reg_range(0x180, 0x1DF),
> + { }
> +};
> +
> +static const struct regmap_range max1721x_regs_deny[] = {
> + regmap_reg_range(0x24, 0x26),
> + regmap_reg_range(0x30, 0x31),
> + regmap_reg_range(0x33, 0x34),
> + regmap_reg_range(0x37, 0x37),
> + regmap_reg_range(0x3B, 0x3C),
> + regmap_reg_range(0x40, 0x41),
> + regmap_reg_range(0x43, 0x44),
> + regmap_reg_range(0x47, 0x49),
> + regmap_reg_range(0x4B, 0x4C),
> + regmap_reg_range(0x4E, 0xAF),
> + regmap_reg_range(0xB1, 0xB3),
> + regmap_reg_range(0xB5, 0xB7),
> + regmap_reg_range(0xBF, 0xD0),
> + regmap_reg_range(0xDB, 0xDB),
> + regmap_reg_range(0xE0, 0x17F),
> + { }
> +};
> +
> +static const struct regmap_access_table max1721x_regs = {
> + .yes_ranges = max1721x_regs_allow,
> + .n_yes_ranges = ARRAY_SIZE(max1721x_regs_allow),
> + .no_ranges = max1721x_regs_deny,
> + .n_no_ranges = ARRAY_SIZE(max1721x_regs_deny),
> +};
It should be enough to specify the yes_range. Unspecified
values will be no implicitly.
> +/* W1 regmap config */
> +static const struct regmap_config max1721x_regmap_w1_config = {
> + .reg_bits = 16,
> + .val_bits = 16,
> + .volatile_table = &max1721x_regs,
> + .max_register = MAX1721X_MAX_REG_NR,
> +};
Are the non-volatile registers missing? Then you probably also
want to specify .rd_table with the same access table, so that
dumping registers via debugfs work correctly. Did you try to
cat /sys/kernel/debug/regmap/<your-device>/registers?
> +static int max1721x_battery_probe(struct platform_device *pdev)
> +{
> + struct power_supply_config psy_cfg = {};
> + struct max17211_device_info *info;
> +
> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, info);
> +
> + info->dev = &pdev->dev;
> + info->w1_dev = pdev->dev.parent;
> + info->bat_desc.name = dev_name(&pdev->dev);
> + info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
> + info->bat_desc.properties = max1721x_battery_props;
> + info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
> + info->bat_desc.get_property = max1721x_battery_get_property;
> + /*
> + * FixMe:
> + * Device without no_thermal = true not register (err -22)
> + * Len of platform device name "max17211-battery.X.auto"
> + * more than 20 chars limit in THERMAL_NAME_LENGTH from
> + * include/uapi/linux/thermal.h
> + */
> + info->bat_desc.no_thermal = true;
> + psy_cfg.drv_data = info;
> +
> + /* regmap init */
> + info->regmap = devm_regmap_init_w1(info->w1_dev,
> + &max1721x_regmap_w1_config);
> + if (IS_ERR(info->regmap)) {
> + int err = PTR_ERR(info->regmap);
> +
> + dev_err(info->dev, "Failed to allocate register map: %d\n",
> + err);
> + return err;
> + }
> +
> + /* rsense init */
> + info->rsense = 0;
> + if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense))
> +
> + if (!info->rsense) {
> + dev_warn(info->dev, "RSenese not calibrated, set 10 mOhms!\n");
> + info->rsense = 1000; /* in regs in 10^-5 */
> + }
> + dev_info(info->dev, "RSense: %d mOhms.\n", info->rsense / 100);
> +
> + if (get_string(info, MAX1721X_REG_MFG_STR,
> + MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
> + dev_err(info->dev, "Can't read manufacturer. Hardware error.\n");
> + return -ENODEV;
> + }
> +
> + if (!info->ManufacturerName[0])
> + strncpy(info->ManufacturerName, DEF_MFG_NAME,
> + 2 * MAX1721X_REG_MFG_NUMB);
> +
> + if (get_string(info, MAX1721X_REG_DEV_STR,
> + MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
> + dev_err(info->dev, "Can't read device. Hardware error.\n");
> + return -ENODEV;
> + }
> + if (!info->DeviceName[0]) {
> + unsigned int dev_name;
> +
> + if (regmap_read(info->regmap,
> + MAX172XX_REG_DEVNAME, &dev_name)) {
> + dev_err(info->w1_dev, "Can't read device name reg.\n");
> + return -ENODEV;
> + }
> +
> + switch (dev_name & MAX172XX_DEV_MASK) {
> + case MAX172X1_DEV:
> + strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
> + 2 * MAX1721X_REG_DEV_NUMB);
> + break;
> + case MAX172X5_DEV:
> + strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
> + 2 * MAX1721X_REG_DEV_NUMB);
> + break;
> + default:
> + strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
> + 2 * MAX1721X_REG_DEV_NUMB);
> + }
> + }
> +
> + if (get_sn_string(info, info->SerialNumber)) {
> + dev_err(info->dev, "Can't read serial. Hardware error.\n");
> + return -ENODEV;
> + }
> +
> + info->bat = devm_power_supply_register(&pdev->dev, &info->bat_desc,
> + &psy_cfg);
> + if (IS_ERR(info->bat)) {
> + dev_err(info->dev, "failed to register battery\n");
> + return PTR_ERR(info->bat);
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver max1721x_battery_driver = {
> + .driver = {
> + .name = "max1721x-battery",
> + },
> + .probe = max1721x_battery_probe,
> +};
> +module_platform_driver(max1721x_battery_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauage IC driver");
> +MODULE_ALIAS("platform:max1721x-battery");
Otherwise looks good.
-- Sebastian
Attachment:
signature.asc
Description: PGP signature