[PATCH 3.10 128/250] USB: serial: ftdi_sio: fix extreme low-latency setting

From: Willy Tarreau
Date: Wed Jun 07 2017 - 19:05:09 EST


From: Johan Hovold <johan@xxxxxxxxxx>

commit c6dce2626606ef16434802989466636bc28c1419 upstream.

Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") the FTDI driver has been using a receive latency-timer value of
1 ms instead of the device default of 16 ms.

The latency timer is used to periodically empty a non-full receive
buffer, but a status header is always sent when the timer expires
including when the buffer is empty. This means that a two-byte bulk
message is received every millisecond also for an otherwise idle port as
long as it is open.

Let's restore the pre-2009 behaviour which reduces the rate of the
status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to
62.5 Hz) by not setting ASYNC_LOW_LATENCY by default.

Anyone willing to pay the price for the minimum-latency behaviour should
set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool
such as setserial (e.g. setserial /dev/ttyUSB0 low_latency).

Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove
tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but
to set a minimal latency timer.

Reported-by: Antoine Aubert <a.aubert@xxxxxxxxxxx>
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Willy Tarreau <w@xxxxxx>
---
drivers/usb/serial/ftdi_sio.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ba04308..960d0e4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1813,8 +1813,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)

mutex_init(&priv->cfg_lock);

- priv->flags = ASYNC_LOW_LATENCY;
-
if (quirk && quirk->port_probe)
quirk->port_probe(priv);

--
2.8.0.rc2.1.gbe9624a