Re: [PATCHv3 1/4] ARM: dts: socfpga: Add Altera I2C Controller to CycloneV

From: Thor Thayer
Date: Wed Jun 07 2017 - 16:42:40 EST


Hi Steffen,

On 06/06/2017 01:40 AM, Steffen Trumtrar wrote:

Hi!

thor.thayer@xxxxxxxxxxxxxxx writes:

From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>

Add the Altera I2C Controller to the CycloneV SoCFPGA device tree.

Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
---
v2 Remove altr, from fifo-size.
Rename compatible string to "altr,softip-i2c"
v3 Add version to commpatible string "altr,softip-i2c-v1.0"
---
arch/arm/boot/dts/socfpga.dtsi | 13 ++++++++++---
arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 28 +++++++++++++++++++++++++++-
2 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index b2674bd..d69c13d 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -133,6 +133,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ clk_0: clk_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "clk_0-clk";
+ };
+
osc1: osc1 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -529,11 +536,11 @@
};
};
- fpga_bridge0: fpga_bridge@ff400000 {
+ fpga_bridge0: fpga_bridge@ff200000 {
compatible = "altr,socfpga-lwhps2fpga-bridge";
- reg = <0xff400000 0x100000>;
+ reg = <0xff200000 0x00200000>;
resets = <&rst LWHPS2FPGA_RESET>;
- clocks = <&l4_main_clk>;
+ clocks = <&clk_0>;
};


Why this change? This looks wrong and unrelated. The LWHPS2FPGA bridge
is at 0xff400000, so it is correct the way it is or not?

Yes, good point. I was using the LWHPS2FPGA slave bus so I shouldn't change this one. I'll add the slave version.

Thanks,

Thor
fpga_bridge1: fpga_bridge@ff500000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 155829f..f99576b 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -68,6 +68,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
};

???

Whoops. I should remove the extra space. Thanks!


(...)


Best regards,
Steffen