[PATCH v4 19/23] mtd: nand: denali: use flag instead of register macro for direction

From: Masahiro Yamada
Date: Mon Jun 05 2017 - 19:28:25 EST


It is not a good idea to re-use macros that represent a specific
register bit field for the transfer direction.

It is true that bit 8 indicates the direction for the MAP10 pipeline
operation and the data DMA operation, but this is not valid across
the IP.

Use a simple flag (write: 1, read: 0) for the direction.

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

Changes in v4: None
Changes in v3: None
Changes in v2:
- Newly added

drivers/mtd/nand/denali.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 755825d..d156d95 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -53,9 +53,6 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
#define MAIN_ACCESS 0x42
#define MAIN_SPARE_ACCESS 0x43

-#define DENALI_READ 0
-#define DENALI_WRITE 0x100
-
#define DENALI_NR_BANKS 4

/*
@@ -284,7 +281,7 @@ static int denali_dev_ready(struct mtd_info *mtd)
*/
static int denali_send_pipeline_cmd(struct denali_nand_info *denali, int page,
bool ecc_en, bool transfer_spare,
- int access_type, int op)
+ int access_type, int write)
{
int status = PASS;
uint32_t addr, cmd;
@@ -295,17 +292,17 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, int page,

addr = BANK(denali->flash_bank) | page;

- if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
+ if (write && access_type != SPARE_ACCESS) {
cmd = MODE_01 | addr;
iowrite32(cmd, denali->flash_mem);
- } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
+ } else if (write && access_type == SPARE_ACCESS) {
/* read spare area */
cmd = MODE_10 | addr;
index_addr(denali, cmd, access_type);

cmd = MODE_01 | addr;
iowrite32(cmd, denali->flash_mem);
- } else if (op == DENALI_READ) {
+ } else {
/* setup page read request for access type */
cmd = MODE_10 | addr;
index_addr(denali, cmd, access_type);
@@ -367,7 +364,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
int status = 0;

if (denali_send_pipeline_cmd(denali, page, false, false, SPARE_ACCESS,
- DENALI_WRITE) == PASS) {
+ 1) == PASS) {
write_data_to_flash_mem(denali, buf, mtd->oobsize);

/* wait for operation to complete */
@@ -392,7 +389,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
uint32_t irq_status, addr, cmd;

if (denali_send_pipeline_cmd(denali, page, false, true, SPARE_ACCESS,
- DENALI_READ) == PASS) {
+ 0) == PASS) {
read_data_from_flash_mem(denali, buf, mtd->oobsize);

/*
@@ -578,7 +575,7 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en)
}

static void denali_setup_dma64(struct denali_nand_info *denali,
- dma_addr_t dma_addr, int page, int op)
+ dma_addr_t dma_addr, int page, int write)
{
uint32_t mode;
const int page_count = 1;
@@ -591,7 +588,8 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
* 1. setup transfer type, interrupt when complete,
* burst len = 64 bytes, the number of pages
*/
- index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count);
+ index_addr(denali, mode,
+ 0x01002000 | (64 << 16) | (write << 8) | page_count);

/* 2. set memory low address */
index_addr(denali, mode, dma_addr);
@@ -601,7 +599,7 @@ static void denali_setup_dma64(struct denali_nand_info *denali,
}

static void denali_setup_dma32(struct denali_nand_info *denali,
- dma_addr_t dma_addr, int page, int op)
+ dma_addr_t dma_addr, int page, int write)
{
uint32_t mode;
const int page_count = 1;
@@ -611,7 +609,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
/* DMA is a four step process */

/* 1. setup transfer type and # of pages */
- index_addr(denali, mode | page, 0x2000 | op | page_count);
+ index_addr(denali, mode | page, 0x2000 | (write << 8) | page_count);

/* 2. set memory high address bits 23:8 */
index_addr(denali, mode | ((dma_addr >> 16) << 8), 0x2200);
@@ -624,12 +622,12 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
}

static void denali_setup_dma(struct denali_nand_info *denali,
- dma_addr_t dma_addr, int page, int op)
+ dma_addr_t dma_addr, int page, int write)
{
if (denali->caps & DENALI_CAP_DMA_64BIT)
- denali_setup_dma64(denali, dma_addr, page, op);
+ denali_setup_dma64(denali, dma_addr, page, write);
else
- denali_setup_dma32(denali, dma_addr, page, op);
+ denali_setup_dma32(denali, dma_addr, page, write);
}

/*
@@ -668,7 +666,7 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
denali_reset_irq(denali);
denali_enable_dma(denali, true);

- denali_setup_dma(denali, addr, page, DENALI_WRITE);
+ denali_setup_dma(denali, addr, page, 1);

/* wait for operation to complete */
irq_status = denali_wait_for_irq(denali, irq_mask);
@@ -750,7 +748,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);

denali_reset_irq(denali);
- denali_setup_dma(denali, addr, page, DENALI_READ);
+ denali_setup_dma(denali, addr, page, 0);

/* wait for operation to complete */
irq_status = denali_wait_for_irq(denali, irq_mask);
@@ -793,7 +791,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);

denali_reset_irq(denali);
- denali_setup_dma(denali, addr, page, DENALI_READ);
+ denali_setup_dma(denali, addr, page, 0);

/* wait for operation to complete */
irq_status = denali_wait_for_irq(denali, irq_mask);
--
2.7.4