[PATCH 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray

From: Anup Patel
Date: Sat May 06 2017 - 07:58:10 EST


We have two instance of PL022 SPI controllers, one instance of
DMA PL330, and one non-secure SP805 Watchdog on Stingray SOC.

This patch adds DT nodes for the above mentioned devices in
Stingray DT.

Signed-off-by: Anup Patel <anup.patel@xxxxxxxxxxxx>
Reviewed-by: Pramod KUMAR <pramod.kumar@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>
---
.../boot/dts/broadcom/stingray/bcm958742k.dts | 30 +++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 52 ++++++++++++++++++++++
2 files changed, 82 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
index c309cda..5671669 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -46,3 +46,33 @@
&uart3 {
status = "okay";
};
+
+&ssp0 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 34 0>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&ssp1 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_hsls 96 0>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index d046b04..36b8ced 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -276,6 +276,14 @@
status = "disabled";
};

+ wdt0: watchdog@689c0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x689c0000 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
gpio_hsls: gpio@689d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x689d0000 0x864>;
@@ -356,11 +364,55 @@
status = "disabled";
};

+ ssp0: ssp@68a80000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x68a80000 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssp1: ssp@68a90000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x68a90000 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+ clock-names = "spiclk", "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
hwrng: hwrng@68b20000 {
compatible = "brcm,iproc-rng200";
reg = <0x68b20000 0x28>;
};

+ dma0: dma@68c10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x68c10000 0x1000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ clocks = <&hsls_div2_clk>;
+ clock-names = "apb_pclk";
+ iommus = <&smmu 0x6000 0x0000>;
+ };
+
nand: nand@68c60000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x68c60000 0x600>,
--
2.7.4