[PATCH 08/11] arm64: dts: Add GPIO DT nodes for Stingray SOC

From: Anup Patel
Date: Sat May 06 2017 - 07:57:34 EST


From: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>

The GPIOs on Stingray SOC are based on iProc GPIOs hence
using this we add GPIO DT nodes for Stingray SOC.

Signed-off-by: Pramod Kumar <pramodku@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>
---
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f9a8e8d..fb51473 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -258,6 +258,40 @@
#include "stingray-clock.dtsi"
#include "stingray-pinctrl.dtsi"

+ gpio_crmu: gpio@66424800 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x66424800 0x4c>;
+ ngpios = <6>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ gpio_hsls: gpio@689d0000 {
+ compatible = "brcm,iproc-gpio";
+ reg = <0x689d0000 0x864>;
+ ngpios = <151>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinmux 0 0 16>,
+ <&pinmux 16 71 2>,
+ <&pinmux 18 131 8>,
+ <&pinmux 26 83 6>,
+ <&pinmux 32 123 4>,
+ <&pinmux 36 43 24>,
+ <&pinmux 60 89 2>,
+ <&pinmux 62 73 4>,
+ <&pinmux 66 95 28>,
+ <&pinmux 94 127 4>,
+ <&pinmux 98 139 10>,
+ <&pinmux 108 16 27>,
+ <&pinmux 135 77 6>,
+ <&pinmux 141 67 4>,
+ <&pinmux 145 149 6>,
+ <&pinmux 151 91 4>;
+ };
+
uart0: uart@68a00000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
--
2.7.4