[PATCH v1 2/2] dt-bindings: phy: Add documentation for Mediatek PCIe PHY

From: Ryder Lee
Date: Thu May 04 2017 - 05:32:26 EST


Add documentation for PCIe PHY available in MT7623 series SoCs.

Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
---
.../devicetree/bindings/phy/phy-mt7623-pcie.txt | 63 ++++++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt b/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt
new file mode 100644
index 0000000..1309500
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mt7623-pcie.txt
@@ -0,0 +1,63 @@
+Mediatek MT7623 PCIe PHY
+-----------------------
+
+Required properties:
+ - compatible: Should contain "mediatek,mt7623-pcie-phy".
+ - reg: Base address and length of the registers.
+ - clocks: Must contain an entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "pciephya_ref"
+ - #phy-cells: Must be 0.
+
+Optional properties:
+ - mediatek,phy-switch: A phandle to the system controller, used to
+ switch the PHY on PCIe port2 which is shared with USB u3phy2.
+
+Example:
+
+ pcie0_phy: pcie-phy@1a149000 {
+ compatible = "mediatek,mt7623-pcie-phy";
+ reg = <0 0x1a149000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-names = "pciephya_ref";
+ #phy-cells = <0>;
+ };
+
+ pcie1_phy: pcie-phy@1a14a000 {
+ compatible = "mediatek,mt7623-pcie-phy";
+ reg = <0 0x1a14a000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-names = "pciephya_ref";
+ #phy-cells = <0>;
+ };
+
+ pcie2_phy: pcie-phy@1a244000 {
+ compatible = "mediatek,mt7623-pcie-phy";
+ reg = <0 0x1a244000 0 0x1000>;
+ clocks = <&clk26m>;
+ clock-names = "pciephya_ref";
+ #phy-cells = <0>;
+
+ mediatek,phy-switch = <&hifsys>;
+ };
+
+Specifying phy control of devices
+---------------------------------
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the phy node and phy-names.
+
+Example:
+
+#include <dt-bindings/phy/phy.h>
+
+pcie: pcie@1a140000 {
+ ...
+ pcie@1,0 {
+ ...
+ phys = <&pcie0_phy>;
+ phy-names = "pcie-phy0";
+ }
+ ...
+};
+
--
1.9.1