[PATCH v3 03/29] x86_64: boot, extract efi_pe_entry from startup_64

From: Jiri Slaby
Date: Fri Apr 21 2017 - 10:13:21 EST


efi_pe_entry body is somehow squashed into startup_64. In the old days,
we forced startup_64 to start at offset 0x200 and efi_pe_entry to start
at 0x210. But this requirement was removed in 99f857db8857 ("x86, build:
Dynamically find entry points in compressed startup code") long time
ago.

The way it is now makes the code less readable and illogical. And given
we can now safely extract the inlined efi_pe_entry body from
startup_64 into a separate function, we do so.

We also annotate the function appropriatelly by ENTRY+ENDPROC.

ABI offsets are preserved:
0000000000000000 T startup_32
0000000000000200 T startup_64
0000000000000390 T efi64_stub_entry

On the top-level, it looked like:
.org 0x200
ENTRY(startup_64)
#ifdef CONFIG_EFI_STUB ; start of inlined
jmp preferred_addr
GLOBAL(efi_pe_entry)
... ; a lot of assembly (efi_pe_entry)
leaq preferred_addr(%rax), %rax
jmp *%rax
preferred_addr:
#endif ; end of inlined
... ; a lot of assembly (startup_64)
ENDPROC(startup_64)

And it is converted into:
.org 0x200
ENTRY(startup_64)
... ; a lot of assembly (startup_64)
ENDPROC(startup_64)

#ifdef CONFIG_EFI_STUB
ENTRY(efi_pe_entry)
... ; a lot of assembly (efi_pe_entry)
leaq startup_64(%rax), %rax
jmp *%rax
ENDPROC(efi_pe_entry)
#endif

Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: <x86@xxxxxxxxxx>
Cc: David Woodhouse <David.Woodhouse@xxxxxxxxx>
Cc: Matt Fleming <matt.fleming@xxxxxxxxx>
---
arch/x86/boot/compressed/head_64.S | 112 ++++++++++++++++++-------------------
1 file changed, 53 insertions(+), 59 deletions(-)

diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d2ae1f821e0c..146751091801 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -243,65 +243,6 @@ ENTRY(startup_64)
* that maps our entire kernel(text+data+bss+brk), zero page
* and command line.
*/
-#ifdef CONFIG_EFI_STUB
- /*
- * The entry point for the PE/COFF executable is efi_pe_entry, so
- * only legacy boot loaders will execute this jmp.
- */
- jmp preferred_addr
-
-ENTRY(efi_pe_entry)
- movq %rcx, efi64_config(%rip) /* Handle */
- movq %rdx, efi64_config+8(%rip) /* EFI System table pointer */
-
- leaq efi64_config(%rip), %rax
- movq %rax, efi_config(%rip)
-
- call 1f
-1: popq %rbp
- subq $1b, %rbp
-
- /*
- * Relocate efi_config->call().
- */
- addq %rbp, efi64_config+40(%rip)
-
- movq %rax, %rdi
- call make_boot_params
- cmpq $0,%rax
- je fail
- mov %rax, %rsi
- leaq startup_32(%rip), %rax
- movl %eax, BP_code32_start(%rsi)
- jmp 2f /* Skip the relocation */
-
-handover_entry:
- call 1f
-1: popq %rbp
- subq $1b, %rbp
-
- /*
- * Relocate efi_config->call().
- */
- movq efi_config(%rip), %rax
- addq %rbp, 40(%rax)
-2:
- movq efi_config(%rip), %rdi
- call efi_main
- movq %rax,%rsi
- cmpq $0,%rax
- jne 2f
-fail:
- /* EFI init failed, so hang. */
- hlt
- jmp fail
-2:
- movl BP_code32_start(%esi), %eax
- leaq preferred_addr(%rax), %rax
- jmp *%rax
-
-preferred_addr:
-#endif

/* Setup data segments. */
xorl %eax, %eax
@@ -371,6 +312,59 @@ preferred_addr:
jmp *%rax

#ifdef CONFIG_EFI_STUB
+
+/* The entry point for the PE/COFF executable is efi_pe_entry. */
+ENTRY(efi_pe_entry)
+ movq %rcx, efi64_config(%rip) /* Handle */
+ movq %rdx, efi64_config+8(%rip) /* EFI System table pointer */
+
+ leaq efi64_config(%rip), %rax
+ movq %rax, efi_config(%rip)
+
+ call 1f
+1: popq %rbp
+ subq $1b, %rbp
+
+ /*
+ * Relocate efi_config->call().
+ */
+ addq %rbp, efi64_config+40(%rip)
+
+ movq %rax, %rdi
+ call make_boot_params
+ cmpq $0,%rax
+ je fail
+ mov %rax, %rsi
+ leaq startup_32(%rip), %rax
+ movl %eax, BP_code32_start(%rsi)
+ jmp 2f /* Skip the relocation */
+
+handover_entry:
+ call 1f
+1: popq %rbp
+ subq $1b, %rbp
+
+ /*
+ * Relocate efi_config->call().
+ */
+ movq efi_config(%rip), %rax
+ addq %rbp, 40(%rax)
+2:
+ movq efi_config(%rip), %rdi
+ call efi_main
+ movq %rax,%rsi
+ cmpq $0,%rax
+ jne 2f
+fail:
+ /* EFI init failed, so hang. */
+ hlt
+ jmp fail
+2:
+ movl BP_code32_start(%esi), %eax
+ leaq startup_64(%rax), %rax
+ jmp *%rax
+ENDPROC(efi_pe_entry)
+
.org 0x390
ENTRY(efi64_stub_entry)
movq %rdi, efi64_config(%rip) /* Handle */
--
2.12.2