[PATCH v4 6/8] ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board

From: Hugues Fruchet
Date: Thu Apr 20 2017 - 12:13:52 EST


Enable OV2640 camera support of STM32F429-EVAL board.

Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
---
arch/arm/boot/dts/stm32429i-eval.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 2bb8a0f..95c33b1 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -48,6 +48,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>

/ {
model = "STMicroelectronics STM32429i-EVAL board";
@@ -66,6 +67,14 @@
serial0 = &usart1;
};

+ clocks {
+ clk_ext_camera: clk-ext-camera {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
soc {
dma-ranges = <0xc0000000 0x0 0x10000000>;
};
@@ -146,6 +155,11 @@

port {
dcmi_0: endpoint {
+ remote-endpoint = <&ov2640_0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
};
};
};
@@ -155,6 +169,22 @@
pinctrl-names = "default";
status = "okay";

+ ov2640: camera@30 {
+ compatible = "ovti,ov2640";
+ reg = <0x30>;
+ resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+ pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+ clocks = <&clk_ext_camera>;
+ clock-names = "xvclk";
+ status = "okay";
+
+ port {
+ ov2640_0: endpoint {
+ remote-endpoint = <&dcmi_0>;
+ };
+ };
+ };
+
stmpe1600: stmpe1600@42 {
compatible = "st,stmpe1600";
reg = <0x42>;
--
1.9.1