Re: [v5,1/8] dt-bindings: mfd: Add retu/tahvo ASIC chips bindings

From: Wolfram Sang
Date: Wed Apr 19 2017 - 15:39:45 EST


On Wed, Apr 12, 2017 at 02:27:52PM -0300, Javier Martinez Canillas wrote:
> There are Device Tree source files defining a device node for the
> retu/tahvo I2C chip, but there isn't a DT binding document for it.
>
> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Acked-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
> Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
>
> Changes in v5:
> - Add missing properties for interrupts to DT binding doc (Rob Herring).
> - Add Rob Herring's Acked-by tag.
> - Add Aaro Koskinen's Acked-by tag.
> - Add Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>'s Acked-by tag.
> - Add Lee Jones <lee.jones@xxxxxxxxxx>'s Acked-by tag.
>
> Changes in v4:
> - Use "dt-bindings: mfd:" prefix in subject line (Rob Herring).
> - Add information about what functions the device serve (Lee Jones).
> - Avoid using MFD in Device Tree (Lee Jones).
>
> Changes in v3: None
> Changes in v2: None
>
> Documentation/devicetree/bindings/mfd/retu.txt | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/retu.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt
> new file mode 100644
> index 000000000000..e1ea3a36a038
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/retu.txt
> @@ -0,0 +1,23 @@
> +* Device tree bindings for Nokia Retu and Tahvo multi-function device
> +
> +Retu and Tahvo are a multi-function devices found on Nokia Internet
> +Tablets (770, N800 and N810). The Retu chip provides watchdog timer
> +and power button control functionalities while Tahvo chip provides
> +USB transceiver functionality.
> +
> +Required properties:
> +- compatible: "nokia,retu" or "nokia,tahvo"
> +- reg: Specifies the I2C slave address of the ASIC chip

This should be "CBUS slave address". CBUS is a strange subset of I2C,
yet I'd like the distinction because 0x1 is not a valid I2C address.

> +- interrupts: The interrupt line the device is connected to
> +- interrupt-parent: The parent interrupt controller
> +
> +Example:
> +
> +i2c0 {

To make it super clear, we are talking CBUS here, it might make sense to
add here:
+ compatible = "i2c-cbus-gpio";
+ ...

? It could be argued that the above "i2c0" should be "cbus0" as well but
that is a separate issue, I'd think.

> + retu: retu@1 {
> + compatible = "nokia,retu";
> + interrupt-parent = <&gpio4>;
> + interrupts = <12 IRQ_TYPE_EDGE_RISING>;
> + reg = <0x1>;
> + };
> +};

Attachment: signature.asc
Description: PGP signature