Re: [PATCH 2/2] hwmon: (brcmstb) Add driver for Broadcom STB DPFE

From: Guenter Roeck
Date: Tue Apr 18 2017 - 18:47:55 EST


Hi Florian,

On Tue, Apr 18, 2017 at 03:29:55PM -0700, Florian Fainelli wrote:
> Hey Guenter,
>
> On 04/18/2017 01:58 PM, Guenter Roeck wrote:
> > Hi Markus,
> >
> > On Tue, Apr 18, 2017 at 01:17:02PM -0700, Markus Mayer wrote:
> >> From: Markus Mayer <mmayer@xxxxxxxxxxxx>
> >>
> >> This driver allows access to DRAM properties, such as the refresh rate,
> >> via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be
> >> used as indirect indicator of the DRAM temperature.
> >>
> >> The driver also allows setting of the sampling interval.
> >>
> >> Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
> >> ---
> > [ ... ]
> >
> >> +
> >> +static SENSOR_DEVICE_ATTR(dpfe_info, 0444, show_info, NULL, 1000);
> >> +static SENSOR_DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh,
> >> + 1000);
> >> +static SENSOR_DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL, 1000);
> >> +static struct attribute *dpfe_attrs[] = {
> >> + &sensor_dev_attr_dpfe_info.dev_attr.attr,
> >> + &sensor_dev_attr_dpfe_refresh.dev_attr.attr,
> >> + &sensor_dev_attr_dpfe_vendor.dev_attr.attr,
> >> + NULL
> >> +};
> >> +ATTRIBUTE_GROUPS(dpfe);
> >> +
> >
> > There is not a single standard hwmon attribute. I don't know how
> > to classify this driver, and where it should reside, but it is not
> > a hwmon driver.
>
> This is a driver that talks to an embedded CPU running firmware which is
> capable of giving various informations about the DRAM chip being
> populated, including a temperature trend (hotter or cooler). We thought
> initially we would be able to expose the actual temperature, but this in
> turn required a lot more knowledge about the DRAM chip that we wish we
> knew about. That is sort of where and why this driver was proposed for
> hwmon.
>
> Which subsystem do you think would be best for this driver drivers/misc/
> or drivers/soc/bcm/brcmstb/ maybe?

Both should work. I would probably try misc first and let Greg tell me
which way to go ;-).

Thanks,
Guenter