Re: [RFC 1/2] dt-bindings: add mmio-based syscon mux controller DT bindings

From: Pavel Machek
Date: Tue Apr 18 2017 - 06:35:00 EST


On Tue 2017-04-18 13:08:41, Sakari Ailus wrote:
> Hi Philipp,
>
> On Tue, Apr 18, 2017 at 10:19:04AM +0200, Philipp Zabel wrote:
> > On Thu, 2017-04-13 at 17:48 +0200, Philipp Zabel wrote:
> > > This adds device tree binding documentation for mmio-based syscon
> > > multiplexers controlled by a single bitfield in a syscon register
> > > range.
> > >
> > > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> > > ---
> > > Documentation/devicetree/bindings/mux/mmio-mux.txt | 56 ++++++++++++++++++++++
> > > 1 file changed, 56 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mux/mmio-mux.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/mux/mmio-mux.txt b/Documentation/devicetree/bindings/mux/mmio-mux.txt
> > > new file mode 100644
> > > index 0000000000000..11d96f5d98583
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mux/mmio-mux.txt
> > > @@ -0,0 +1,56 @@
> > > +MMIO bitfield-based multiplexer controller bindings
> > > +
> > > +Define a syscon bitfield to be used to control a multiplexer. The parent
> > > +device tree node must be a syscon node to provide register access.
> > > +
> > > +Required properties:
> > > +- compatible : "gpio-mux"
> > > +- reg : register base of the register containing the control bitfield
> > > +- bit-mask : bitmask of the control bitfield in the control register
> > > +- bit-shift : bit offset of the control bitfield in the control register
> > > +- #mux-control-cells : <0>
> > > +* Standard mux-controller bindings as decribed in mux-controller.txt
> > > +
> > > +Optional properties:
> > > +- idle-state : if present, the state the mux will have when idle. The
> > > + special state MUX_IDLE_AS_IS is the default.
> > > +
> > > +The multiplexer state is defined as the value of the bitfield described
> > > +by the reg, bit-mask, and bit-shift properties, accessed through the parent
> > > +syscon.
> > > +
> > > +Example:
> > > +
> > > + syscon {
> > > + compatible = "syscon";
> > > +
> > > + mux: mux-controller@3 {
> > > + compatible = "mmio-mux";
> > > + reg = <0x3>;
> > > + bit-mask = <0x1>;
> > > + bit-shift = <5>;
> > > + #mux-control-cells = <0>;
> > > + };
> > > + };
> > > +
> > > + video-mux {
> > > + compatible = "video-mux";
> > > + mux-controls = <&mux>;
> > > +
> > > + ports {
> > > + /* input 0 */
> > > + port@0 {
> > > + reg = <0>;
> > > + };
> > > +
> > > + /* input 1 */
> > > + port@1 {
> > > + reg = <1>;
> > > + };
> > > +
> > > + /* output */
> > > + port@2 {
> > > + reg = <2>;
> > > + };
> > > + };
> > > + };
> >
> > So Pavel (added to Cc:) suggested to merge these into one node for the
> > video mux, as really we are describing a single hardware entity that
> > happens to be multiplexing multiple video buses into one:
>
> Two drivers will be needed in a way or another to disconnect the dependency
> between the video switch driver and the MUX implementation. Are there ways
> to do that cleanly other than having two devices?

Yes.

Device tree describes hardware, not the driver structure.

Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature