Re: [PATCH v5 3/3] mfd: wm831x: Add device tree binding document

From: Lee Jones
Date: Thu Mar 23 2017 - 07:48:28 EST


On Fri, 17 Mar 2017, Charles Keepax wrote:

> Add a device tree binding document for the wm831x series of PMICs.
> Currently only support for the registering the device and the GPIOs are
> actually implemented in the driver.
>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> Changes since v4:
> - Removed one extra level of ../ for relative links that was incorrect
>
> Thanks,
> Charles
>
> Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 82 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
> new file mode 100644
> index 0000000..9f8b743
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
> @@ -0,0 +1,81 @@
> +Cirrus Logic/Wolfson Microelectronics wm831x PMICs
> +
> +System PMICs with a wide range of additional features.
> +
> +Required properties:
> +
> + - compatible : One of the following chip-specific strings:
> + "wlf,wm8310"
> + "wlf,wm8311"
> + "wlf,wm8312"
> + "wlf,wm8320"
> + "wlf,wm8321"
> + "wlf,wm8325"
> + "wlf,wm8326"
> +
> + - reg : I2C slave address when connected using I2C, chip select number
> + when using SPI.
> +
> + - gpio-controller : Indicates this device is a GPIO controller.
> + - #gpio-cells : Must be 2. The first cell is the pin number and the
> + second cell is used to specify optional parameters (currently unused).
> +
> + - interrupts : The interrupt line the IRQ signal for the device is
> + connected to.
> + - interrupt-parent : The parent interrupt controller.
> +
> + - interrupt-controller : wm831x devices contain interrupt controllers and
> + may provide interrupt services to other devices.
> + - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the
> + second cell is the flags, encoded as the trigger masks from
> + ../interrupt-controller/interrupts.txt
> +
> +Optional sub-nodes:
> + - regulators : Contains sub-nodes for each of the regulators supplied by
> + the device. The regulators are bound using their names listed below:
> +
> + dcdc1 : DCDC1
> + dcdc2 : DCDC2
> + dcdc3 : DCDC3
> + dcdc4 : DCDC3
> + isink1 : ISINK1
> + isink2 : ISINK2
> + ldo1 : LDO1
> + ldo2 : LDO2
> + ldo3 : LDO3
> + ldo4 : LDO4
> + ldo5 : LDO5
> + ldo7 : LDO7
> + ldo11 : LDO11
> +
> + The bindings details of each regulator can be found in:
> + ../regulator/regulator.txt
> +
> +Example:
> +
> +wm8310: pmic@36 {
> + compatible = "wlf,wm8310";
> + reg = <0x36>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupts = <347>;
> + interrupt-parent = <&gic>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + dcdc1: dcdc1 {
> + regulator-name = "DCDC1";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <600000>;
> + };
> + ldo1: ldo1 {
> + regulator-name = "LDO1";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1700000>;
> + };
> + };
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c265a5f..dfe761b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13600,6 +13600,7 @@ F: Documentation/hwmon/wm83??
> F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
> F: Documentation/devicetree/bindings/mfd/arizona.txt
> +F: Documentation/devicetree/bindings/mfd/wm831x.txt
> F: arch/arm/mach-s3c64xx/mach-crag6410*
> F: drivers/clk/clk-wm83*.c
> F: drivers/extcon/extcon-arizona.c

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog