[PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts

[Tony Lindgren]

On CPCAP we need to keep reading interrupts until there are no
more interrupts. Otherwise the PMIC interrupt to the SoC will at
some point stop toggling. This seems to happen because new CPCAP
device interrupts show up while we're handling.

Cc: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Marcel Partap <mpartap@xxxxxxx>
Cc: Michael Scott <michael.scott@xxxxxxxxxx>
Tested-by: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 drivers/mfd/motorola-cpcap.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -71,6 +71,7 @@ static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = {
 		.ack_base = CPCAP_REG_MI1,
 		.mask_base = CPCAP_REG_MIM1,
 		.use_ack = true,
+		.handle_reread = true,
 	},
 	{
 		.name = "cpcap-m2",
@@ -79,6 +80,7 @@ static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = {
 		.ack_base = CPCAP_REG_MI2,
 		.mask_base = CPCAP_REG_MIM2,
 		.use_ack = true,
+		.handle_reread = true,
 	},
 	{
 		.name = "cpcap1-4",
@@ -88,6 +90,7 @@ static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = {
 		.mask_base = CPCAP_REG_INTM1,
 		.type_base = CPCAP_REG_INTS1,
 		.use_ack = true,
+		.handle_reread = true,
 	},
 };
 
-- 
2.11.1