[PATCH] ARM: imx_v6_v7_defconfig: Select SMSC_PHY

From: Leonard Crestez
Date: Wed Mar 22 2017 - 10:28:14 EST


The imx6sl-evk board has a LAN8720A ethernet phy supported by SMSC_PHY.
Add this driver to the default imx config since the device is present on
one of the evaluation boards.

This used to work mostly fine with the generic phy driver but since
commit 0878fff1f42c18e448ab5b8b4f6a3eb32365b5b6 that driver no longer
performs a soft reset on startup. This causes netboot to sometimes
timeout on DHCP because RX doesn't work right. DHCP is eventually retried and
it works the second time but it takes 90+ seconds to get a login prompt.

This was generated with "make savedefconfig" and it includes a few
additional minor cleanups.

Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
---

I also tried to do some debugging in the fec driver and it apparently receives
corrupted packets when this happens. If I hack it to go into promiscuous mode
unconditionally it gets a whole bunch of rx errors (crc errors, length errors
and so on). So the phy config is probably wrong and is confusing the mac?

In theory it might be possible to make that driver "just work" with phy
settings from uboot but it's not clear it's worthwhile.

arch/arm/configs/imx_v6_v7_defconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index eaba3b1..e605389 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -143,6 +143,7 @@ CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_AT803X_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_SMSC_PHY=y
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
@@ -152,7 +153,6 @@ CONFIG_BRCMFMAC=m
CONFIG_WL12XX=m
CONFIG_WLCORE_SDIO=m
# CONFIG_WILINK_PLATFORM_DATA is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
CONFIG_KEYBOARD_GPIO=y
@@ -376,7 +376,6 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
--
2.7.4