[PATCH v2 0/5] clk: meson: Fix GXBB and GXL/GXM GP0 PLL

From: Neil Armstrong
Date: Wed Mar 22 2017 - 06:33:10 EST


This patchset fixes support for the Amlogic GXBB then GXL/GXM embedded GP0 PLL.

The current support is done via a very generic interface where only the
N/M/OD parameters are changed in the control registers.

But unlike the Fixed PLL, this PLL is not initialized by the bootloader or
firmware, and needs some parameters to initialize and lock correctly.

This patchset also adds the GXL variant compatible string which is already
supported by the GXL and GXM DT nodes.

Changes since v1 at [1]:
- Rebase on the Mali clocks patchset at [2]
- also depends on v2 Audio Clocks patchset from Jerome Brunet at [3]
- Add match table and separate tables for gxl
- Switch to probe function to use match table data only
- Rename unreset_for_lock to clear_reset_for_lock

[1] http://lkml.kernel.org/r/1489411604-18700-1-git-send-email-narmstrong@xxxxxxxxxxxx
[2] http://lkml.kernel.org/r/1490177935-9646-1-git-send-email-narmstrong@xxxxxxxxxxxx
[3] http://lkml.kernel.org/r/20170309104154.28295-1-jbrunet@xxxxxxxxxxxx

Neil Armstrong (5):
clk: meson: Add support for parameters for specific PLLs
clk: meson-gxbb: Add GP0 PLL init parameters
clk: meson-gxbb: Add GXL/GXM GP0 Variant
clk: meson-gxbb: Expose GP0 dt-bindings clock id
dt-bindings: clock: gxbb-clkc: Add GXL compatible variant

.../bindings/clock/amlogic,gxbb-clkc.txt | 3 +-
drivers/clk/meson/clk-pll.c | 53 +++-
drivers/clk/meson/clkc.h | 23 ++
drivers/clk/meson/gxbb.c | 314 +++++++++++++++++++--
drivers/clk/meson/gxbb.h | 4 +-
include/dt-bindings/clock/gxbb-clkc.h | 1 +
6 files changed, 366 insertions(+), 32 deletions(-)

--
1.9.1