Re: [PATCH v3 1/2] doc: Add bindings document for Xilinx LogiCore PR Decoupler

From: Alan Tull
Date: Mon Mar 20 2017 - 12:18:37 EST


On Fri, Mar 17, 2017 at 3:11 PM, Moritz Fischer <mdf@xxxxxxxxxx> wrote:

Hi Moritz,

Minor nits below. Otherwise, looks good.

> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
>
> Signed-off-by: Moritz Fischer <mdf@xxxxxxxxxx>
> Cc: Michal Simek <michal.simek@xxxxxxxxxx>
> Cc: SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx

Acked-by: Alan Tull <atull@xxxxxxxxxx>

> ---
>
> Changes from v2:
> - Added refence to generic fpga-region bindings
> - Fixed up reg property in example
> - Added fallback to "xlnx,pr-decoupler" without version
>
> Changes from v1:
> - Added clock names & clock to example
> - Merged some of the description from Michal's version
>
> ---
> .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 0000000..16141bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,35 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge. The controller can also
> +couple / enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +The Driver supports only MMIO handling. A PR region can have multiple
> +PR Decouples which can bhe handled independently or chaines via decouple/

s/PR Decoupler/PR Decouplers/
s/bhe/be/
s/chaines/chained/

> +decouple_status signals.
> +
> +Required properties:
> +- compatible : Should contain "xlnx,pr-decoupler-1.00"
> +- regs : base address and size for decoupler module
> +- clocks : input clock to IP
> +- clock-names : should contain "aclk"
> +
> +Optional properties:
> +- bridge-enable : 0 if driver should disable bridge at startup
> + 1 if driver should enable bridge at startup
> + Default is to leave bridge in current state.
> +
> +See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
> +
> +Example:
> + fpga-bridge@100000450 {
> + compatible = "xlnx,pr-decoupler-1.00",
> + "xlnx-pr-decoupler";
> + regs = <0x10000045 0x10>;
> + clocks = <&clkc 15>;
> + clock-names = "aclk";
> + bridge-enable = <0>;
> + };
> --
> 2.7.4
>