Re: [PATCH v2 3/4] watchdog: iTCO_wdt: Fix PMC GCR memory mapping failure

From: sathyanarayanan kuppuswamy
Date: Fri Mar 17 2017 - 13:20:01 EST


Hi Rajneesh,


On 03/17/2017 04:43 AM, Rajneesh Bhardwaj wrote:
On Thu, Mar 16, 2017 at 05:41:35PM -0700, Kuppuswamy Sathyanarayanan wrote:
Currently, iTCO watchdog driver uses memory map to access
PMC_CFG GCR register. But the entire GCR address space is
already mapped in intel_scu_ipc driver. So remapping the
intel_pmc_ipc driver.
Will fix it in next series.

GCR register in this driver causes the mem request failure in
iTCO_wdt probe function. This patch fixes this issue by
using PMC GCR read/write API's to access PMC_CFG register.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
---
drivers/watchdog/iTCO_wdt.c | 31 +++++++------------------------
1 file changed, 7 insertions(+), 24 deletions(-)

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 3d0abc0..31abfc5 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -68,6 +68,8 @@
#include <linux/io.h> /* For inb/outb/... */
#include <linux/platform_data/itco_wdt.h>
+#include <asm/intel_pmc_ipc.h>
+
#include "iTCO_vendor.h"
/* Address definitions for the TCO */
@@ -94,12 +96,6 @@ struct iTCO_wdt_private {
unsigned int iTCO_version;
struct resource *tco_res;
struct resource *smi_res;
- /*
- * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
- * or memory-mapped PMC register bit 4 (TCO version 3).
- */
Better to retain this comment elsewhere.
no_reboot_bit() function might be better place for this comment.

- struct resource *gcs_pmc_res;
- unsigned long __iomem *gcs_pmc;
/* the lock for io operations */
spinlock_t io_lock;
/* the PCI-device */
@@ -176,9 +172,9 @@ static void iTCO_wdt_set_NO_REBOOT_bit(struct iTCO_wdt_private *p)
/* Set the NO_REBOOT bit: this disables reboots */
if (p->iTCO_version >= 2) {
- val32 = readl(p->gcs_pmc);
+ val32 = intel_pmc_gcr_read(PMC_GCR_PMC_CFG_REG);
better to have protection and error handling, discussed in v2, 2/4.

compiled and tested this on APL and i see iTCO_WDT driver loads fine. Since
it impacts core WDT functionality, need to be thoroughly tested on various
platforms.
I have tested it in Joule and it works fine. it would be nice if some one can verify it in non-atom platforms.

--
2.7.4


--
Sathyanarayanan Kuppuswamy
Android kernel developer