Re: [PATCH v4 1/7] coresight: bindings for CPU debug module

From: Mathieu Poirier
Date: Fri Mar 17 2017 - 12:23:06 EST


On Fri, Mar 17, 2017 at 11:02:17PM +0800, Leo Yan wrote:
> According to ARMv8 architecture reference manual (ARM DDI 0487A.k)
> Chapter 'Part H: External debug', the CPU can integrate debug module
> and it can support self-hosted debug and external debug. Especially
> for supporting self-hosted debug, this means the program can access
> the debug module from mmio region; and usually the mmio region is
> integrated with coresight.
>
> So add document for binding debug component, includes binding to APB
> clock; and also need specify the CPU node which the debug module is
> dedicated to specific CPU.
>
> Suggested-by: Mike Leach <mike.leach@xxxxxxxxxx>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> ---
> .../bindings/arm/coresight-cpu-debug.txt | 46 ++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> new file mode 100644
> index 0000000..f6855c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> @@ -0,0 +1,46 @@
> +* CoreSight CPU Debug Component:
> +
> +CoreSight cpu debug component are compliant with the ARMv8 architecture
> +reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
> +external debug module is mainly used for two modes: self-hosted debug and
> +external debug, and it can be accessed from mmio region from Coresight
> +and eventually the debug module connects with CPU for debugging. And the
> +debug module provides sample-based profiling extension, which can be used
> +to sample CPU program counter, secure state and exception level, etc;
> +usually every CPU has one dedicated debug module to be connected.
> +
> +Required properties:
> +
> +- compatible : should be
> + * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
> + since this driver is using the AMBA bus interface.

This description needs to be refactored - see my comment from an earlier post
for more details.

> +
> +- reg : physical base address and length of the register set.
> +
> +- clocks : the clock associated to this component.
> +
> +- clock-names : the name of the clock referenced by the code. Since we are
> + using the AMBA framework, the name of the clock providing
> + the interconnect should be "apb_pclk" and the clock is
> + mandatory. The interface between the debug logic and the
> + processor core is clocked by the internal CPU clock, so it
> + is enabled with CPU clock by default.
> +
> +- cpu : the cpu phandle the debug module is affined to. When omitted
> + the module is considered to belong to CPU0.
> +
> +Optional properties:

s/properties/property

> +
> +- power-domains: a phandle to power domain node for debug module. We can
> + use "nohlt" to ensure CPU power domain is enabled.

The "power-domains" property is to take care of the debug power domain. The
"nohlt" is to make sure registers in the CPU power domain are accessible - both
are independent from one another. As such the description for this binding
shoudl be:

"a phandle to the debug power domain".

Thanks,
Mathieu

> +
> +
> +Example:
> +
> + debug@f6590000 {
> + compatible = "arm,coresight-cpu-debug","arm,primecell";
> + reg = <0 0xf6590000 0 0x1000>;
> + clocks = <&sys_ctrl HI6220_DAPB_CLK>;
> + clock-names = "apb_pclk";
> + cpu = <&cpu0>;
> + };
> --
> 2.7.4
>