[PATCH 8/8] net: stmmac: invert the logic for dumping regs

From: Corentin Labbe
Date: Tue Feb 14 2017 - 15:00:46 EST


It is easier to follow the logic by removing the not operator

Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index aab895d..5ff6bc4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -442,24 +442,24 @@ static void stmmac_ethtool_gregs(struct net_device *dev,

memset(reg_space, 0x0, REG_SPACE_SIZE);

- if (!(priv->plat->has_gmac || priv->plat->has_gmac4)) {
+ if (priv->plat->has_gmac || priv->plat->has_gmac4) {
/* MAC registers */
- for (i = 0; i < 12; i++)
+ for (i = 0; i < 55; i++)
reg_space[i] = readl(priv->ioaddr + (i * 4));
/* DMA registers */
- for (i = 0; i < 9; i++)
- reg_space[i + 12] =
+ for (i = 0; i < 22; i++)
+ reg_space[i + 55] =
readl(priv->ioaddr + (DMA_BUS_MODE + (i * 4)));
- reg_space[22] = readl(priv->ioaddr + DMA_CUR_TX_BUF_ADDR);
- reg_space[23] = readl(priv->ioaddr + DMA_CUR_RX_BUF_ADDR);
} else {
/* MAC registers */
- for (i = 0; i < 55; i++)
+ for (i = 0; i < 12; i++)
reg_space[i] = readl(priv->ioaddr + (i * 4));
/* DMA registers */
- for (i = 0; i < 22; i++)
- reg_space[i + 55] =
+ for (i = 0; i < 9; i++)
+ reg_space[i + 12] =
readl(priv->ioaddr + (DMA_BUS_MODE + (i * 4)));
+ reg_space[22] = readl(priv->ioaddr + DMA_CUR_TX_BUF_ADDR);
+ reg_space[23] = readl(priv->ioaddr + DMA_CUR_RX_BUF_ADDR);
}
}

--
2.10.2