[PATCH v13 08/12] binding-doc: usb: usb-device: add optional properties for power sequence

From: Peter Chen
Date: Fri Feb 10 2017 - 20:49:48 EST


Add optional properties for power sequence.

Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/usb-device.txt | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 1c35e7b..3661dd2 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -13,6 +13,10 @@ Required properties:
- reg: the port number which this device is connecting to, the range
is 1-31.

+Optional properties:
+power sequence properties, see
+Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail
+
Example:

&usb1 {
@@ -21,8 +25,12 @@ Example:
#address-cells = <1>;
#size-cells = <0>;

- hub: genesys@1 {
+ genesys: hub@1 {
compatible = "usb5e3,608";
reg = <1>;
+
+ clocks = <&clks IMX6SX_CLK_CKO>;
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */
+ reset-duration-us = <10>;
};
}
--
2.7.4