[PATCH v2 6/7] serial: exar: Move register defines from uapi header to consumer site

From: Jan Kiszka
Date: Wed Feb 08 2017 - 11:31:45 EST


None of these registers is relevant for the userspace API.

Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_exar.c | 13 +++++++++++++
drivers/tty/serial/8250/8250_port.c | 6 ++++++
include/uapi/linux/serial_reg.h | 18 ------------------
3 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 9af4266..f612da3 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -34,6 +34,19 @@
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358

+#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
+
+#define UART_EXAR_FCTR 0x08 /* Feature Control Register */
+#define UART_FCTR_EXAR_IRDA 0x10 /* IrDa data encode select */
+#define UART_FCTR_EXAR_485 0x20 /* Auto 485 half duplex dir ctl */
+#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */
+#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */
+#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */
+#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */
+
+#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */
+#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
+
#define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */
#define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */
#define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index ec6b5e3..6119516 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -45,6 +45,12 @@
#include "8250.h"

/*
+ * These are definitions for the Exar XR17V35X and XR17(C|D)15X
+ */
+#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
+#define UART_EXAR_DVID 0x8d /* Device identification */
+
+/*
* Debugging.
*/
#if 0
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 25b93a7..5db7688 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -367,24 +367,6 @@
#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */

/*
- * These are definitions for the Exar XR17V35X and XR17(C|D)15X
- */
-#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
-#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
-#define UART_EXAR_DVID 0x8d /* Device identification */
-
-#define UART_EXAR_FCTR 0x08 /* Feature Control Register */
-#define UART_FCTR_EXAR_IRDA 0x10 /* IrDa data encode select */
-#define UART_FCTR_EXAR_485 0x20 /* Auto 485 half duplex dir ctl */
-#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */
-#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */
-#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */
-#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */
-
-#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */
-#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
-
-/*
* These are definitions for the Altera ALTR_16550_F32/F64/F128
* Normalized from 0x100 to 0x40 because of shift by 2 (32 bit regs).
*/
--
2.1.4