[PATCH v2 07/16] net: stmmac: replace stmmac_mdio_busy_wait by readl_poll_timeout

From: Corentin Labbe
Date: Wed Feb 08 2017 - 03:35:03 EST


The stmmac_mdio_busy_wait() function do the same job than
readl_poll_timeout().
So is is better to replace it.

Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 33 ++++++++---------------
1 file changed, 11 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index c24bef2..d9893cf 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -21,6 +21,7 @@
*******************************************************************************/

#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mii.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
@@ -38,22 +39,6 @@
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)

-static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr)
-{
- unsigned long curr;
- unsigned long finish = jiffies + 3 * HZ;
-
- do {
- curr = jiffies;
- if (readl(ioaddr + mii_addr) & MII_BUSY)
- cpu_relax();
- else
- return 0;
- } while (!time_after_eq(curr, finish));
-
- return -EBUSY;
-}
-
/**
* stmmac_mdio_read
* @bus: points to the mii_bus structure
@@ -70,7 +55,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
-
+ u32 v;
int data;
u32 value = MII_BUSY;

@@ -82,12 +67,14 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
if (priv->plat->has_gmac4)
value |= MII_GMAC4_READ;

- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;

writel(value, priv->ioaddr + mii_address);

- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;

/* Read the data from the MII data register */
@@ -111,7 +98,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
-
+ u32 v;
u32 value = MII_BUSY;

value |= (phyaddr << priv->hw->mii.addr_shift)
@@ -126,7 +113,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
value |= MII_WRITE;

/* Wait until any existing MII operation is complete */
- if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address))
+ if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000))
return -EBUSY;

/* Set the MII address register to write */
@@ -134,7 +122,8 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
writel(value, priv->ioaddr + mii_address);

/* Wait until any existing MII operation is complete */
- return stmmac_mdio_busy_wait(priv->ioaddr, mii_address);
+ return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000);
}

/**
--
2.10.2