Re: [PATCH 3/4] net: ethernet: ti: cpsw: don't duplicate ndev_running

From: Grygorii Strashko
Date: Thu Jan 12 2017 - 12:35:54 EST




On 01/10/2017 07:56 PM, Ivan Khoronzhuk wrote:
> On Mon, Jan 09, 2017 at 11:25:38AM -0600, Grygorii Strashko wrote:
>>
>>
>> On 01/08/2017 10:41 AM, Ivan Khoronzhuk wrote:
>>> No need to create additional vars to identify if interface is running.
>>> So simplify code by removing redundant var and checking usage counter
>>> instead.
>>>
>>> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
>>> ---
>>> drivers/net/ethernet/ti/cpsw.c | 14 ++++----------
>>> 1 file changed, 4 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
>>> index 40d7fc9..daae87f 100644
>>> --- a/drivers/net/ethernet/ti/cpsw.c
>>> +++ b/drivers/net/ethernet/ti/cpsw.c
>>> @@ -357,7 +357,6 @@ struct cpsw_slave {
>>> struct phy_device *phy;
>>> struct net_device *ndev;
>>> u32 port_vlan;
>>> - u32 open_stat;
>>> };
>>>
>>> static inline u32 slave_read(struct cpsw_slave *slave, u32 offset)
>>> @@ -1241,7 +1240,7 @@ static int cpsw_common_res_usage_state(struct cpsw_common *cpsw)
>>> u32 usage_count = 0;
>>>
>>> for (i = 0; i < cpsw->data.slaves; i++)
>>> - if (cpsw->slaves[i].open_stat)
>>> + if (netif_running(cpsw->slaves[i].ndev))
>>> usage_count++;
>>
>> Not sure this will work as you expected, but may be I've missed smth :(
> I've changed conditions, will work.
>
>>
>> code in static int __dev_open(struct net_device *dev)
>> ..
>> set_bit(__LINK_STATE_START, &dev->state);
>>
>> if (ops->ndo_validate_addr)
>> ret = ops->ndo_validate_addr(dev);
>>
>> if (!ret && ops->ndo_open)
>> ret = ops->ndo_open(dev);
>>
>> netpoll_poll_enable(dev);
>>
>> if (ret)
>> clear_bit(__LINK_STATE_START, &dev->state);
>> ..
>>
>> so, netif_running(ndev) will start returning true before calling ops->ndo_open(dev);
> Yes, It's done bearing it in mind of course.
>
>>
>>>
>>> return usage_count;
>>> @@ -1502,7 +1501,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
>>> CPSW_RTL_VERSION(reg));
>>>
>>> /* initialize host and slave ports */
>>> - if (!cpsw_common_res_usage_state(cpsw))
>>> + if (cpsw_common_res_usage_state(cpsw) < 2)
>>
>> Ah. You've changed the condition here.
>>
>> I think it might be reasonable to hide this inside cpsw_common_res_usage_state()
>> and seems it can be renamed to smth like cpsw_is_running().
> It probably needs to be renamed to smth a little different,
> like cpsw_get_usage_count ...or cpsw_get_open_ndev_count

cpsw_get_usage_count () sounds good

>
>>
>>
>>> cpsw_init_host_port(priv);
>>> for_each_slave(priv, cpsw_slave_open, priv);
>>>
>>> @@ -1513,7 +1512,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
>>> cpsw_ale_add_vlan(cpsw->ale, cpsw->data.default_vlan,
>>> ALE_ALL_PORTS, ALE_ALL_PORTS, 0, 0);
>>>
>>> - if (!cpsw_common_res_usage_state(cpsw)) {
>>> + if (cpsw_common_res_usage_state(cpsw) < 2) {
>>> /* disable priority elevation */
>>> __raw_writel(0, &cpsw->regs->ptype);
>>>
>>> @@ -1556,9 +1555,6 @@ static int cpsw_ndo_open(struct net_device *ndev)
>>> cpdma_ctlr_start(cpsw->dma);
>>> cpsw_intr_enable(cpsw);
>>>
>>> - if (cpsw->data.dual_emac)
>>> - cpsw->slaves[priv->emac_port].open_stat = true;
>>> -
>>> return 0;
>>>
>>> err_cleanup:
>>> @@ -1578,7 +1574,7 @@ static int cpsw_ndo_stop(struct net_device *ndev)
>>> netif_tx_stop_all_queues(priv->ndev);
>>> netif_carrier_off(priv->ndev);
>>>
>>> - if (cpsw_common_res_usage_state(cpsw) <= 1) {
>>> + if (!cpsw_common_res_usage_state(cpsw)) {
>>
>> and here __LINK_STATE_START will be cleared before calling ops->ndo_stop(dev);
> Actually it's changed because of it.
>
>> So, from one side netif_running(ndev) usage will simplify cpsw_common_res_usage_state() internals,
>> but from another side - it will make places where it's used even more entangled :( as for me,
>> because when cpsw_common_res_usage_state() will return 1 in cpsw_ndo_open() it will mean
>> "no interfaces is really running yet", but the same value 1 in cpsw_ndo_stop()
> why not? no interfaces running, except the one excuting ndo_open now.
> It's more clear then duplicating it and using two different ways in
> different places for identifing running devices. Current way more
> close to some testing code, not final version. Just to be consistent
> better to change it.
>
> Yes, it returns different results when it's called from ndo_close and
> ndo_open. Maybe name for the function is not very close to an action
> it's doing, it declares more intention, and even not for every case.
> What about to rename it to some cpsw_get_open_ndev_count and add
> comments in several places explaining what it actually do.

yes. please. comments are required at least.

its actually a question why __LINK_STATE_START is managed this way in ./net/core/dev.c

__dev_open()
set_bit(__LINK_STATE_START, &dev->state); <---- before .ndo_open()

if (!ret && ops->ndo_open)
ret = ops->ndo_open(dev);

<---- shouldn't set_bit(__LINK_STATE_START, &dev->state) be after calling .ndo_open() ??

__dev_close_many()

clear_bit(__LINK_STATE_START, &dev->state); <-stop sequence is differ from open.

if (ops->ndo_stop)
ops->ndo_stop(dev);


--
regards,
-grygorii