Re: [PATCH 1/2] arm64: dma_mapping: allow PCI host driver to limit DMA mask

From: Nikita Yushchenko
Date: Wed Jan 04 2017 - 10:30:44 EST


>>>> For OF platforms, this is called via of_dma_configure(), that checks
>>>> dma-ranges of node that is *parent* for host bridge. Host bridge
>>>> currently does not control this at all.
>>>
>>> We need to think about this a bit. Is it actually the PCI host
>>> bridge that limits the ranges here, or the bus that it is connected
>>> to. In the latter case, the caller needs to be adapted to handle
>>> both.
>>
>> In r-car case, I'm not sure what is the source of limitation at physical
>> level.
>>
>> pcie-rcar driver configures ranges for PCIe inbound transactions based
>> on dma-ranges property in it's device tree node. In the current device
>> tree for this platform, that only contains one range and it is in lower
>> memory.
>>
>> NVMe driver tries i/o to kmalloc()ed area. That returns 0x5xxxxxxxx
>> addresses here. As a quick experiment, I tried to add second range to
>> pcie-rcar's dma-ranges to cover 0x5xxxxxxxx area - but that did not make
>> DMA to high addresses working.
>>
>> My current understanding is that host bridge hardware module can't
>> handle inbound transactions to PCI addresses above 4G - and this
>> limitations comes from host bridge itself.
>>
>> I've read somewhere in the lists that pcie-rcar hardware is "32-bit" -
>> but I don't remember where, and don't know lowlevel details. Maybe
>> somebody from linux-renesas can elaborate?
>
> Just a guess, but if the inbound translation windows in the host
> bridge are wider than 32-bit, the reason for setting up a single
> 32-bit window is probably because that is what the parent bus supports.

Well anyway applying patch similar to your's will fix pcie-rcar + nvme
case - thus I don't object :) But it can break other cases ...

But why do you hook at set_dma_mask() and overwrite mask inside, instead
of hooking at dma_supported() and rejecting unsupported mask?

I think later is better, because it lets drivers to handle unsupported
high-dma case, like documented in DMA-API_HOWTO.