[PATCH 2/2] blackfin: ezbrd: Remove non-functional DSA/KSZ8893M code

From: Florian Fainelli
Date: Sun Jan 01 2017 - 17:42:47 EST


There is no in tree driver for the KSZ8893M switch driver, so just get rid of
the code in that board file.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
arch/blackfin/mach-bf518/boards/ezbrd.c | 47 ---------------------------------
1 file changed, 47 deletions(-)

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d022112927c2..c51d1b810ac3 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -25,7 +25,6 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
-#include <net/dsa.h>

/*
* Name the Board for the /proc/cpuinfo
@@ -105,11 +104,7 @@ static const unsigned short bfin_mac_peripherals[] = {

static struct bfin_phydev_platform_data bfin_phydev_data[] = {
{
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- .addr = 3,
-#else
.addr = 1,
-#endif
.irq = IRQ_MAC_PHYINT,
},
};
@@ -119,9 +114,6 @@ static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
.phydev_data = bfin_phydev_data,
.phy_mode = PHY_INTERFACE_MODE_MII,
.mac_peripherals = bfin_mac_peripherals,
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
-#endif
.vlan1_mask = 1,
.vlan2_mask = 2,
};
@@ -140,29 +132,6 @@ static struct platform_device bfin_mac_device = {
}
};

-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
-static struct dsa_chip_data ksz8893m_switch_chip_data = {
- .mii_bus = &bfin_mii_bus.dev,
- .port_names = {
- NULL,
- "eth%d",
- "eth%d",
- "cpu",
- },
-};
-static struct dsa_platform_data ksz8893m_switch_data = {
- .nr_chips = 1,
- .netdev = &bfin_mac_device.dev,
- .chip = &ksz8893m_switch_chip_data,
-};
-
-static struct platform_device ksz8893m_switch_device = {
- .name = "dsa",
- .id = 0,
- .num_resources = 0,
- .dev.platform_data = &ksz8893m_switch_data,
-};
-#endif
#endif

#if IS_ENABLED(CONFIG_MTD_M25P80)
@@ -228,19 +197,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
},
#endif

-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- {
- .modalias = "ksz8893m",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 1,
- .platform_data = NULL,
- .mode = SPI_MODE_3,
- },
-#endif
-#endif
-
#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
@@ -714,9 +670,6 @@ static struct platform_device *stamp_devices[] __initdata = {
#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
-#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
- &ksz8893m_switch_device,
-#endif
#endif

#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
--
2.9.3