[PATCH 1/2] soc: ti: Use remoteproc auto_boot feature

From: Sarangdhar Joshi
Date: Thu Dec 15 2016 - 19:04:02 EST


The function wkup_m3_rproc_boot_thread waits for asynchronous
firmware loading to complete successfully before calling
rproc_boot(). The same can be achieved by just setting
rproc->auto_boot flag. Change this. As a result this change
removes wkup_m3_rproc_boot_thread and moves m3_ipc->sync_complete
initialization to the wkup_m3_ipc_probe().

Other than the current usage, the firmware_loading_complete is
only used in rproc_del() where it's no longer needed. This
change is in preparation for removing firmware_loading_complete
completely.

CC: Dave Gerlach <d-gerlach@xxxxxx>
CC: Suman Anna <s-anna@xxxxxx>
CC: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Sarangdhar Joshi <spjoshi@xxxxxxxxxxxxxx>
---

Hi Suman,

Unfortunately, I don't have a TI device and couldn't test this
change. Is it possible for you to test this change on TI device?

Thanks in advance.

Regards,
Sarang

drivers/remoteproc/wkup_m3_rproc.c | 2 +-
drivers/soc/ti/wkup_m3_ipc.c | 35 ++---------------------------------
2 files changed, 3 insertions(+), 34 deletions(-)

diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 18175d0..79ea022 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -167,7 +167,7 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
goto err;
}

- rproc->auto_boot = false;
+ rproc->auto_boot = true;

wkupm3 = rproc->priv;
wkupm3->rproc = rproc;
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 8823cc8..31090d70 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -17,7 +17,6 @@

#include <linux/err.h>
#include <linux/kernel.h>
-#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -365,22 +364,6 @@ void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc)
}
EXPORT_SYMBOL_GPL(wkup_m3_ipc_put);

-static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
-{
- struct device *dev = m3_ipc->dev;
- int ret;
-
- wait_for_completion(&m3_ipc->rproc->firmware_loading_complete);
-
- init_completion(&m3_ipc->sync_complete);
-
- ret = rproc_boot(m3_ipc->rproc);
- if (ret)
- dev_err(dev, "rproc_boot failed\n");
-
- do_exit(0);
-}
-
static int wkup_m3_ipc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -388,7 +371,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
phandle rproc_phandle;
struct rproc *m3_rproc;
struct resource *res;
- struct task_struct *task;
struct wkup_m3_ipc *m3_ipc;

m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL);
@@ -402,6 +384,8 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
return PTR_ERR(m3_ipc->ipc_mem_base);
}

+ init_completion(&m3_ipc->sync_complete);
+
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "no irq resource\n");
@@ -449,25 +433,10 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)

m3_ipc->ops = &ipc_ops;

- /*
- * Wait for firmware loading completion in a thread so we
- * can boot the wkup_m3 as soon as it's ready without holding
- * up kernel boot
- */
- task = kthread_run((void *)wkup_m3_rproc_boot_thread, m3_ipc,
- "wkup_m3_rproc_loader");
-
- if (IS_ERR(task)) {
- dev_err(dev, "can't create rproc_boot thread\n");
- goto err_put_rproc;
- }
-
m3_ipc_state = m3_ipc;

return 0;

-err_put_rproc:
- rproc_put(m3_rproc);
err_free_mbox:
mbox_free_channel(m3_ipc->mbox);
return ret;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project