[PATCH v4 2/6] [media] rc-main: split setup and unregister functions

From: Andi Shyti
Date: Wed Dec 14 2016 - 09:02:08 EST


Move the input device allocation, map and protocol handling to
different functions.

Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
Reviewed-by: Sean Young <sean@xxxxxxxx>
---
drivers/media/rc/rc-main.c | 143 +++++++++++++++++++++++++--------------------
1 file changed, 81 insertions(+), 62 deletions(-)

diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index a6bbceb..59fac96 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1436,16 +1436,12 @@ struct rc_dev *devm_rc_allocate_device(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_rc_allocate_device);

-int rc_register_device(struct rc_dev *dev)
+static int rc_setup_rx_device(struct rc_dev *dev)
{
- static bool raw_init = false; /* raw decoders loaded? */
- struct rc_map *rc_map;
- const char *path;
- int attr = 0;
- int minor;
int rc;
+ struct rc_map *rc_map;

- if (!dev || !dev->map_name)
+ if (!dev->map_name)
return -EINVAL;

rc_map = rc_map_get(dev->map_name);
@@ -1454,6 +1450,19 @@ int rc_register_device(struct rc_dev *dev)
if (!rc_map || !rc_map->scan || rc_map->size == 0)
return -EINVAL;

+ rc = ir_setkeytable(dev, rc_map);
+ if (rc)
+ return rc;
+
+ if (dev->change_protocol) {
+ u64 rc_type = (1ll << rc_map->rc_type);
+
+ rc = dev->change_protocol(dev, &rc_type);
+ if (rc < 0)
+ goto out_table;
+ dev->enabled_protocols = rc_type;
+ }
+
set_bit(EV_KEY, dev->input_dev->evbit);
set_bit(EV_REP, dev->input_dev->evbit);
set_bit(EV_MSC, dev->input_dev->evbit);
@@ -1463,6 +1472,61 @@ int rc_register_device(struct rc_dev *dev)
if (dev->close)
dev->input_dev->close = ir_close;

+ /*
+ * Default delay of 250ms is too short for some protocols, especially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes. Note that this must be
+ * set after the call to input_register_device().
+ */
+ dev->input_dev->rep[REP_DELAY] = 500;
+
+ /*
+ * As a repeat event on protocols like RC-5 and NEC take as long as
+ * 110/114ms, using 33ms as a repeat period is not the right thing
+ * to do.
+ */
+ dev->input_dev->rep[REP_PERIOD] = 125;
+
+ /* rc_open will be called here */
+ rc = input_register_device(dev->input_dev);
+ if (rc)
+ goto out_table;
+
+ dev->input_dev->dev.parent = &dev->dev;
+ memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
+ dev->input_dev->phys = dev->input_phys;
+ dev->input_dev->name = dev->input_name;
+
+ return 0;
+
+out_table:
+ ir_free_table(&dev->rc_map);
+
+ return rc;
+}
+
+static void rc_free_rx_device(struct rc_dev *dev)
+{
+ if (!dev)
+ return;
+
+ ir_free_table(&dev->rc_map);
+
+ input_unregister_device(dev->input_dev);
+ dev->input_dev = NULL;
+}
+
+int rc_register_device(struct rc_dev *dev)
+{
+ static bool raw_init = false; /* raw decoders loaded? */
+ const char *path;
+ int attr = 0;
+ int minor;
+ int rc;
+
+ if (!dev)
+ return -EINVAL;
+
minor = ida_simple_get(&rc_ida, 0, RC_DEV_MAX, GFP_KERNEL);
if (minor < 0)
return minor;
@@ -1486,39 +1550,15 @@ int rc_register_device(struct rc_dev *dev)
if (rc)
goto out_unlock;

- rc = ir_setkeytable(dev, rc_map);
- if (rc)
- goto out_dev;
-
- dev->input_dev->dev.parent = &dev->dev;
- memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
- dev->input_dev->phys = dev->input_phys;
- dev->input_dev->name = dev->input_name;
-
- rc = input_register_device(dev->input_dev);
- if (rc)
- goto out_table;
-
- /*
- * Default delay of 250ms is too short for some protocols, especially
- * since the timeout is currently set to 250ms. Increase it to 500ms,
- * to avoid wrong repetition of the keycodes. Note that this must be
- * set after the call to input_register_device().
- */
- dev->input_dev->rep[REP_DELAY] = 500;
-
- /*
- * As a repeat event on protocols like RC-5 and NEC take as long as
- * 110/114ms, using 33ms as a repeat period is not the right thing
- * to do.
- */
- dev->input_dev->rep[REP_PERIOD] = 125;
-
path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
dev_info(&dev->dev, "%s as %s\n",
dev->input_name ?: "Unspecified device", path ?: "N/A");
kfree(path);

+ rc = rc_setup_rx_device(dev);
+ if (rc)
+ goto out_dev;
+
if (dev->driver_type == RC_DRIVER_IR_RAW) {
if (!raw_init) {
request_module_nowait("ir-lirc-codec");
@@ -1526,36 +1566,20 @@ int rc_register_device(struct rc_dev *dev)
}
rc = ir_raw_event_register(dev);
if (rc < 0)
- goto out_input;
- }
-
- if (dev->change_protocol) {
- u64 rc_type = (1ll << rc_map->rc_type);
- rc = dev->change_protocol(dev, &rc_type);
- if (rc < 0)
- goto out_raw;
- dev->enabled_protocols = rc_type;
+ goto out_rx;
}

/* Allow the RC sysfs nodes to be accessible */
atomic_set(&dev->initialized, 1);

- IR_dprintk(1, "Registered rc%u (driver: %s, remote: %s, mode %s)\n",
+ IR_dprintk(1, "Registered rc%u (driver: %s)\n",
dev->minor,
- dev->driver_name ? dev->driver_name : "unknown",
- rc_map->name ? rc_map->name : "unknown",
- dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
+ dev->driver_name ? dev->driver_name : "unknown");

return 0;

-out_raw:
- if (dev->driver_type == RC_DRIVER_IR_RAW)
- ir_raw_event_unregister(dev);
-out_input:
- input_unregister_device(dev->input_dev);
- dev->input_dev = NULL;
-out_table:
- ir_free_table(&dev->rc_map);
+out_rx:
+ rc_free_rx_device(dev);
out_dev:
device_del(&dev->dev);
out_unlock:
@@ -1601,12 +1625,7 @@ void rc_unregister_device(struct rc_dev *dev)
if (dev->driver_type == RC_DRIVER_IR_RAW)
ir_raw_event_unregister(dev);

- /* Freeing the table should also call the stop callback */
- ir_free_table(&dev->rc_map);
- IR_dprintk(1, "Freed keycode table\n");
-
- input_unregister_device(dev->input_dev);
- dev->input_dev = NULL;
+ rc_free_rx_device(dev);

device_del(&dev->dev);

--
2.10.2