[PATCH v6 2/5] mtd: ubi: use 'max_bad_blocks' to compute bad_peb_limit if available

[Zach Brown]

From: Jeff Westfahl <jeff.westfahl@xxxxxx>

If the user has not set max_beb_per1024 using either the cmdline or
Kconfig options for doing so, use the MTD function 'max_bad_blocks' to
compute the UBI bad_peb_limit.

Signed-off-by: Jeff Westfahl <jeff.westfahl@xxxxxx>
Signed-off-by: Zach Brown <zach.brown@xxxxxx>
Acked-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxx>
---
 drivers/mtd/ubi/build.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 85d54f3..3029219 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -584,8 +584,17 @@ static int get_bad_peb_limit(const struct ubi_device *ubi, int max_beb_per1024)
 	int limit, device_pebs;
 	uint64_t device_size;
 
-	if (!max_beb_per1024)
-		return 0;
+	if (!max_beb_per1024) {
+		/*
+		 * Since max_beb_per1024 has not been set by the user in either
+		 * the cmdline or Kconfig, use mtd_max_bad_blocks to set the
+		 * limit if it is supported by the device.
+		 */
+		limit = mtd_max_bad_blocks(ubi->mtd, 0, ubi->mtd->size);
+		if (limit < 0)
+			return 0;
+		return limit;
+	}
 
 	/*
 	 * Here we are using size of the entire flash chip and
-- 
2.7.4