[PATCH 06/22] NTB: Slightly alter link state NTB API

From: Serge Semin
Date: Tue Nov 29 2016 - 12:22:58 EST


Some minor changes of link state NTB API. Particularly link_is_up()
method from now shall return a bitfield of link states for all accessible
port indexes.

Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>

---
include/linux/ntb.h | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/include/linux/ntb.h b/include/linux/ntb.h
index fc9d034..a59a155 100644
--- a/include/linux/ntb.h
+++ b/include/linux/ntb.h
@@ -221,7 +221,7 @@ struct ntb_dev_ops {
int (*peer_port_number)(struct ntb_dev *ntb, int pidx);
int (*peer_port_idx)(struct ntb_dev *ntb, int port);

- int (*link_is_up)(struct ntb_dev *ntb,
+ u64 (*link_is_up)(struct ntb_dev *ntb,
enum ntb_speed *speed, enum ntb_width *width);
int (*link_enable)(struct ntb_dev *ntb,
enum ntb_speed max_speed, enum ntb_width max_width);
@@ -567,25 +567,26 @@ static inline int ntb_peer_port_idx(struct ntb_dev *ntb, int port)
* state once after every link event. It is safe to query the link state in
* the context of the link event callback.
*
- * Return: One if the link is up, zero if the link is down, otherwise a
- * negative value indicating the error number.
+ * Return: bitfield of indexed ports link state: bit is set/cleared if the
+ * link is up/down respectively, otherwise a negative value indicating
+ * an error number.
*/
-static inline int ntb_link_is_up(struct ntb_dev *ntb,
+static inline u64 ntb_link_is_up(struct ntb_dev *ntb,
enum ntb_speed *speed, enum ntb_width *width)
{
return ntb->ops->link_is_up(ntb, speed, width);
}

/**
- * ntb_link_enable() - enable the link on the secondary side of the ntb
+ * ntb_link_enable() - enable the link of the ntb
* @ntb: NTB device context.
* @max_speed: The maximum link speed expressed as PCIe generation number.
* @max_width: The maximum link width expressed as the number of PCIe lanes.
*
- * Enable the link on the secondary side of the ntb. This can only be done
- * from the primary side of the ntb in primary or b2b topology. The ntb device
- * should train the link to its maximum speed and width, or the requested speed
- * and width, whichever is smaller, if supported.
+ * Enable the NTB/PCIe link on the local or remote (for bridge-to-bridge
+ * topology) side of the bridge. The ntb device should train the link to its
+ * maximum speed and width, or the requested speed and width, whichever is
+ * smaller, if supported.
*
* Return: Zero on success, otherwise an error number.
*/
@@ -597,14 +598,14 @@ static inline int ntb_link_enable(struct ntb_dev *ntb,
}

/**
- * ntb_link_disable() - disable the link on the secondary side of the ntb
+ * ntb_link_disable() - disable the link of the ntb
* @ntb: NTB device context.
*
- * Disable the link on the secondary side of the ntb. This can only be
- * done from the primary side of the ntb in primary or b2b topology. The ntb
- * device should disable the link. Returning from this call must indicate that
- * a barrier has passed, though with no more writes may pass in either
- * direction across the link, except if this call returns an error number.
+ * Disable the link on the local or remote (for b2b topology) of the ntb.
+ * The ntb device should disable the link. Returning from this call must
+ * indicate that a barrier has passed, though with no more writes may pass in
+ * either direction across the link, except if this call returns an error
+ * number.
*
* Return: Zero on success, otherwise an error number.
*/
--
2.6.6