[PATCH v6 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake SoC

From: Mika Westerberg
Date: Mon Nov 28 2016 - 07:07:43 EST


Intel Apollo Lake SoC exposes serial SPI flash through the LPC device. The
SPI flash host controller is not discoverable through PCI config cycles
because P2SB (function 0 of the device 13) is hidden by the BIOS. We unhide
the device briefly in order to read BAR 0 of the SPI host controller.

Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Marek Vasut <marek.vasut@xxxxxxxxx>
---
drivers/mfd/lpc_ich.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index ad88e827a398..909229cecf41 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -56,6 +56,7 @@
* document number TBD : Wildcat Point-LP
* document number TBD : 9 Series
* document number TBD : Lewisburg
+ * document number TBD : Apollo Lake SoC
*/

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -92,6 +93,8 @@
#define BCR 0xdc
#define BCR_WPD BIT(0)

+#define SPIBASE_APL_SZ 4096
+
#define GPIOBASE_ICH0 0x58
#define GPIOCTRL_ICH0 0x5C
#define GPIOBASE_ICH6 0x48
@@ -239,6 +242,7 @@ enum lpc_chipsets {
LPC_BRASWELL, /* Braswell SoC */
LPC_LEWISBURG, /* Lewisburg */
LPC_9S, /* 9 Series */
+ LPC_APL, /* Apollo Lake SoC */
};

static struct lpc_ich_info lpc_chipset_info[] = {
@@ -559,6 +563,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
.name = "9 Series",
.iTCO_version = 2,
},
+ [LPC_APL] = {
+ .name = "Apollo Lake SoC",
+ .spi_type = INTEL_SPI_BXT,
+ },
};

/*
@@ -707,6 +715,7 @@ static const struct pci_device_id lpc_ich_ids[] = {
{ PCI_VDEVICE(INTEL, 0x3b14), LPC_3420},
{ PCI_VDEVICE(INTEL, 0x3b16), LPC_3450},
{ PCI_VDEVICE(INTEL, 0x5031), LPC_EP80579},
+ { PCI_VDEVICE(INTEL, 0x5ae8), LPC_APL},
{ PCI_VDEVICE(INTEL, 0x8c40), LPC_LPT},
{ PCI_VDEVICE(INTEL, 0x8c41), LPC_LPT},
{ PCI_VDEVICE(INTEL, 0x8c42), LPC_LPT},
@@ -1126,6 +1135,36 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
}
break;

+ case INTEL_SPI_BXT: {
+ unsigned int p2sb = PCI_DEVFN(13, 0);
+ unsigned int spi = PCI_DEVFN(13, 2);
+ struct pci_bus *bus = dev->bus;
+
+ /*
+ * The P2SB is hidden by BIOS and we need to unhide it in
+ * order to read BAR of the SPI flash device. Once that is
+ * done we hide it again.
+ */
+ pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x0);
+ pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0,
+ &spi_base);
+ if (spi_base != ~0) {
+ res->start = spi_base & 0xfffffff0;
+ res->end = res->start + SPIBASE_APL_SZ - 1;
+
+ pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+ if (!(bcr & BCR_WPD)) {
+ bcr |= BCR_WPD;
+ pci_bus_write_config_dword(bus, spi, BCR, bcr);
+ pci_bus_read_config_dword(bus, spi, BCR, &bcr);
+ }
+ info->writeable = !!(bcr & BCR_WPD);
+ }
+
+ pci_bus_write_config_byte(bus, p2sb, 0xe1, 0x1);
+ break;
+ }
+
default:
return -EINVAL;
}
--
2.10.2