Re: Tearing down DMA transfer setup after DMA client has finished

From: Mason
Date: Thu Nov 24 2016 - 10:21:13 EST


On 24/11/2016 15:17, Måns Rullgård wrote:

> Mason wrote:
>
>> [ 35.085854] SETUP DMA
>> [ 35.088272] START NAND TRANSFER
>> [ 35.091670] tangox_dma_pchan_start from tangox_dma_irq
>> [ 35.096882] tango_dma_callback from vchan_complete
>> [ 45.102513] DONE FAKE SPINNING
>>
>> So the IRQ rolls in, the ISR calls tangox_dma_pchan_start,
>> which calls tangox_dma_pchan_detach to tear down the sbox
>> setup; and only sometime later does the DMA framework call
>> my callback function.
>
> Yes, I realised this soon after I said it. The dma driver could be
> rearranged to make it work though.

There is a way to make the tasklet run and invoke the callback
before the interrupt service routine proceeds? Can you say more
about this?


>> So far, the work-arounds I've tested are:
>>
>> 1) delay sbox tear-down by 10 µs in tangox_dma_pchan_detach.
>> 2) statically setup sbox in probe, and never touch it henceforth.
>>
>> WA1 is fragile, it might break for devices other than NFC.
>> WA2 is what I used when I wrote the NFC driver.
>>
>> Can tangox_dma_irq() be changed to have the framework call
>> the client's callback *before* tangox_dma_pchan_start?
>>
>> (Thinking out loud) The DMA_PREP_INTERRUPT requests that the
>> DMA framework invoke the callback from tasklet context,
>> maybe a different flag DMA_PREP_INTERRUPT_EX can request
>> calling the call-back directly from within the ISR?
>>
>> (Looking at existing flags) Could I use DMA_CTRL_ACK?
>> Description sounds like some kind hand-shake between
>> client and dmaengine.
>>
>> Grepping for DMA_PREP_INTERRUPT, I don't see where the framework
>> checks that flag to spawn the tasklet? Or is that up to each
>> driver individually?
>
> Those flags all have defined meanings and abusing them for other things
> is a bad idea. As far as possible, device drivers should work with any
> dma driver.

I was asking about introducing a new flag, not abusing existing
flags. (I don't understand the semantics of DMA_CTRL_ACK.)

(FWIW, both the NFC and the MBUS agent are custom designs,
not third-party IP blocks.)

Regards.