Re: [PATCH 1/4] Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition

[Keerthy]

On Wednesday 09 November 2016 09:40 PM, Lee Jones wrote:
> On Thu, 27 Oct 2016, Keerthy wrote:
>
> > GPIO7 is configured in POWERHOLD mode which has higher priority
> > over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
> > bit is turned off. This property enables driver to over ride the
> > POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
> > scenarios.
> >
> > Signed-off-by: Keerthy <j-keerthy@xxxxxx>
> > ---
> >  Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt | 9 +++++++++
> >  1 file changed, 9 insertions(+)
>
> This requires a DT Ack.

Okay.

> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
> > index caf297b..c28d4eb8 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
> > @@ -35,6 +35,15 @@ Optional properties:
> >  - ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode.
> >  	Selection primary or secondary function associated to GPADC_START
> >  	and SYSEN2 pin/pad for DVFS2 interface
> > +- ti,palmas-override-powerhold: This is applicable for PMICs for which
> > +	GPIO7 is configured in POWERHOLD mode which has higher priority
> > +	over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
> > +	bit is turned off. This property enables driver to over ride the
> > +	POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
> > +	scenarios. So for GPIO7 if ti,palmas-override-powerhold is set
> > +	then the GPIO_7 field should never be muxed to anything else.
> > +	It should be set to POWERHOLD by default and only in case of
> > +	power off scenarios the driver will over ride the mux value.
> >
> >  This binding uses the following generic properties as defined in
> >  pinctrl-bindings.txt: