Re: [Intel-wired-lan] [PATCH] igb: drop field "tail" of struct igb_ring

[Cao jin]

On 11/08/2016 12:12 PM, Alexander Duyck wrote:
> On Monday, November 7, 2016, Cao jin <caoj.fnst@xxxxxxxxxxxxxx
> <mailto:caoj.fnst@xxxxxxxxxxxxxx>> wrote:

> We removed head because it isn't really accessed very often, it is only
> really used for when the ring is configured.  Tail is accessed every
> time we add a descriptor to a ring.  The pointer chasing from ring to
> netdev to adapter to hw is expensive.  That is one of the rasons why
> we cache the pointer to the tail register.

I see. I can submit the patch as you suggested.

>             Signed-off-by: Cao jin <caoj.fnst@xxxxxxxxxxxxxx>
>             ---
>                drivers/net/ethernet/intel/igb/igb.h      |  1 -
>                drivers/net/ethernet/intel/igb/igb_main.c | 16
>             +++++++++-------

>     hw->hw_addr could be alterred to NULL(in igb_rd32), this is why
>     writel oops the kernel, you give a fine solution.
>
>     But from the oops message, we can find, register reading returns all
>     F's, I also have a question want to consult: when igb device is
>     reset, would reading register(no matter config space or non-PCIe
>     configuration registers) during reset returns all F's? (I guess this
>     is the core of my issue)
>
>
> An all F's value means the read failed.  The device is likely off of the
> bus and the hw_addr may not have been repopulated after the reset.
>
> You might want to check the mailing list as I thought someone had
> submitted a patch recently for one of the drivers to repopulate hw_addr
> after a reset.

I guess you are saying this one:
  http://patchwork.ozlabs.org/patch/689592/

Seems they have a similar issue with me.


--
Yours Sincerely,

Cao jin