[PATCH 1/2] mfd: rn5t618: Add Ricoh RC5T619 PMIC support

From: Pierre-Hugues Husson
Date: Sat Nov 05 2016 - 12:20:28 EST


The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is,
the differences are:

+ DCDC4/DCDC5
+ LDO7-10
+ Slightly different output voltage/currents
+ 32kHz Output
+ RTC
+ USB Charger detection

Signed-off-by: Pierre-Hugues Husson <phh@xxxxxx>
---
Documentation/devicetree/bindings/mfd/rn5t618.txt | 16 ++++++++++------
drivers/mfd/Kconfig | 3 ++-
drivers/mfd/rn5t618.c | 1 +
include/linux/mfd/rn5t618.h | 9 +++++++++
4 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index 9e6770b..65c2326 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -1,21 +1,25 @@
* Ricoh RN5T567/RN5T618 PMIC

-Ricoh RN5T567/RN5T618 is a power management IC family which integrates
-3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
-a watchdog timer. The RN5T618 provides additionally a Li-ion battery
-charger, fuel gauge and an ADC. It can be controlled through an I2C
-interface.
+Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
+integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
+GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
+The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
+fuel gauge, and an ADC.
+The RC5T619 additionnally includes USB charger detection and an RTC.

Required properties:
- compatible: must be one of
"ricoh,rn5t567"
"ricoh,rn5t618"
+ "ricoh,rc5t619"
- reg: the I2C slave address of the device

Sub-nodes:
- regulators: the node is required if the regulator functionality is
needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
- (RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+ (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
+ LDO9, LDO10, LDORTC1 and LDORTC2.
+ LDO7-10 are specific to RC5T619.
The common bindings for each individual regulator can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c6df644..65d0a65 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -881,7 +881,8 @@ config MFD_RN5T618
select MFD_CORE
select REGMAP_I2C
help
- Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC.
+ Say yes here to add support for the Ricoh RN5T567,
+ RN5T618, RC5T619 PMIC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index 9d377d6..0b5a2a1 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -87,6 +87,7 @@ static int rn5t618_restart(struct notifier_block *this,
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
+ { .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
{ }
};
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index cadc654..e5a6cde 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -58,10 +58,13 @@
#define RN5T618_DC3CTL2 0x31
#define RN5T618_DC4CTL 0x32
#define RN5T618_DC4CTL2 0x33
+#define RN5T618_DC5CTL 0x34
+#define RN5T618_DC5CTL2 0x35
#define RN5T618_DC1DAC 0x36
#define RN5T618_DC2DAC 0x37
#define RN5T618_DC3DAC 0x38
#define RN5T618_DC4DAC 0x39
+#define RN5T618_DC5DAC 0x3a
#define RN5T618_DC1DAC_SLP 0x3b
#define RN5T618_DC2DAC_SLP 0x3c
#define RN5T618_DC3DAC_SLP 0x3d
@@ -77,6 +80,11 @@
#define RN5T618_LDO3DAC 0x4e
#define RN5T618_LDO4DAC 0x4f
#define RN5T618_LDO5DAC 0x50
+#define RN5T618_LDO6DAC 0x51
+#define RN5T618_LDO7DAC 0x52
+#define RN5T618_LDO8DAC 0x53
+#define RN5T618_LDO9DAC 0x54
+#define RN5T618_LDO10DAC 0x55
#define RN5T618_LDORTCDAC 0x56
#define RN5T618_LDORTC2DAC 0x57
#define RN5T618_LDO1DAC_SLP 0x58
@@ -231,6 +239,7 @@ enum {
enum {
RN5T567 = 0,
RN5T618,
+ RC5T619,
};

struct rn5t618 {
--
2.10.1