Re: [PATCH v5 0/3] Broadcom STB AVS CPUfreq driver

[Markus Mayer]

On 27 October 2016 at 14:05, Markus Mayer <code@xxxxxxxxxx> wrote:
> From: Markus Mayer <mmayer@xxxxxxxxxxxx>
>
> This series contains the CPUfreq driver for Broadcom SoCs that use "AVS
> Firmware" for voltage and frequency scaling. All voltage and frequency
> transitions are performed by the firmware and are therefore hidden from
> Linux.
>
> The driver provides a standard CPUfreq interface to other kernel
> components and to userland on the one hand and communicates with the
> AVS co-processor on the other.
>
> Communication between the two processors is via shared mailbox
> registers and interrupts (ARM -> AVS to tell the firmware that there is
> a command to process and AVS -> ARM to tell the driver that a command
> finished executing).

Viresh, Rafael, are you ready to take this series? Rob gave his Ack
for the DT binding.

You can pull from [1] if you prefer. The branch already has all the Acks.

Thanks,
-Markus

[1] https://github.com/mmayer/linux/commits/upstream-avs-cpufreq-4.9-v5

> Changes from v4:
>     - Addressed comments regarding the binding document (see also
>       https://lkml.org/lkml/2016/10/19/642)
>     - Added Virsh's Acks
>     - Rebased on v4.9-rc1
>     - Patches sent from non-Broadcom account on purpose to prevent series
>       from being marked as spam (this is currently happening for some
>       recipients)
>     - No changes to any code
>
> Changes from v3:
>     - moved code from brcm_avs_cpufreq_exit() into brcm_avs_cpufreq_remove()
>     - removed brcm_avs_cpufreq_exit() altogether
>
> Changes from v2:
>     - removed file Documentation/cpu-freq/brcmstb-avs-cpufreq.txt, instead
>       adding the text as comment in the driver itself
>     - wildcard match in MAINTAINERS file (drivers/cpufreq/brcmstb*)
>     - drivers/cpufreq/Kconfig.arm: have ARM_BRCMSTB_AVS_CPUFREQ default y
>       for ARCH_BRCMSTB
>     - fixed naming and Kconfig entry for CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
>     - reordered and fixed include files
>     - made sure driver name doesn't exceed size of cpufreq_driver.name
>     - got rid of device_node pointers in struct private_data; there's no
>       need for them, as we can call of_node_put() in __map_region()
>     - don't set driver_data for CPUFREQ_TABLE_END
>     - have brcm_avs_cpufreq_get() read from the firmware rather than return
>       policy->cur
>     - don't update policy->cur in brcm_avs_target_index()
>     - created new function brcm_avs_prepare_init() to handle compatibility
>       checks during initialization and moved corresponding code from
>       brcm_avs_cpufreq_init() to the new function
>     - brcm_avs_prepare_init() is called from brcm_avs_cpufreq_probe() and
>       therefore will only be called once, even in the case of an error,
>       whereas brcm_avs_cpufreq_init() is called for every core if there is
>       an error
>     - renamed brcm_avs_cpu_(init|exit) to brcm_avs_cpufreq_(init|exit)
>     - added platform_set_drvdata(pdev, NULL) upon deregistration
>     - fixed various style complaints by checkpatch.pl --strict
>     - fixed other style issues
>     - updated and improved some comments
>     - added Viresh's Acks to patches 1/3 and 3/3
>
> Changes from v1:
>     - renamed binding document
>     - rewrote the introduction of the binding document
>     - created a new driver documentation file that contains Linux specific
>       information that was previously part of the binding document
>     - renamed the driver (and related config options) to include a reference
>       to "STB", since this implementation is primarily intended for use on
>       set-top boxes
>     - improved comments
>     - updated function __map_region()
>     - updated struct private_data
>     - added code to unmap memory regions in the error and exit paths
>     - added new sysfs property to report frequency directly from the
>       co-processor register
>
> Markus Mayer (3):
>   dt: cpufreq: brcm: New binding document for brcmstb-avs-cpufreq
>   cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs
>   cpufreq: brcmstb-avs-cpufreq: add debugfs support
>
>  .../bindings/cpufreq/brcm,stb-avs-cpu-freq.txt     |   78 ++
>  MAINTAINERS                                        |    8 +
>  drivers/cpufreq/Kconfig.arm                        |   21 +
>  drivers/cpufreq/Makefile                           |    1 +
>  drivers/cpufreq/brcmstb-avs-cpufreq.c              | 1057 ++++++++++++++++++++
>  5 files changed, 1165 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
>  create mode 100644 drivers/cpufreq/brcmstb-avs-cpufreq.c
>
> --
> 2.7.4
>