Re: [PATCH V3 1/6] clk: tegra: add TEGRA20_CLK_NOR to init table

[Jon Hunter]

On 03/11/16 12:30, Mirza Krak wrote:
> 2016-11-03 13:26 GMT+01:00 Mirza Krak <mirza.krak@xxxxxxxxx>:
> > 2016-11-03 11:06 GMT+01:00 Jon Hunter <jonathanh@xxxxxxxxxx>:
> > > Hi Mirza,
> > >
> > > On 27/10/16 15:01, Mirza Krak wrote:
> > > > From: Mirza Krak <mirza.krak@xxxxxxxxx>
> > > >
> > > > Add TEGRA20_CLK_NOR to init table and set default rate to 92 MHz which
> > > > is max rate.
> > > >
> > > > The maximum rate value of 92 MHz is pulled from the downstream L4T
> > > > kernel.
> > >
> > >
> > > Thanks for adding this. I assume that this is from an L4T r16 release with a
> > > v3.1 kernel. I had a quick poke through the kernel sources for v3.1 but was
> > > unable to see where this is set. Obviously v3.1 did not have CCF and so
> > > everything seems to be in the arch/arm/mach-tegra directory for setting up
> > > clocks. Can you point me to the appropriate sources so I can ACK this?
> >
> > I use the kernel sources provided by Toradex, and these sources are
> > based on L4T r16 release.
> >
> > http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463
>
> Ops, pre-mature send.
>
> I also added Marcel from Toradex on CC.
>
> The link to the source are [1] for Tegra2 and  [2] for Tegra3.
>
> [1]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra2_clocks.c?h=tegra#n2463
> [2]. http://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/mach-tegra/tegra3_clocks.c?h=tegra#n4353

Great. Yes I see the same. Thanks!

Jon

--
nvpublic