Re: [PATCH v1 1/2] mtd: m25p80: lock module while used

From: Sandeep Jain
Date: Thu Nov 03 2016 - 07:41:16 EST


Dear Maintainers,
Requesting for your attention for patch review/merge.

Thanks & Regards,
Sandeep Jain

On Thu, Aug 04, 2016 at 07:46:33PM +0530, Sandeep Jain wrote:
> From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
>
> The change controls module users counter, which prevents to get
> accidental oops on module unload while it is in use by mtd subsystem:
>
> % dd if=/dev/mtd0 of=/dev/null &
> % rmmod m25p80
>
> Removing MTD device #0 (spi32766.0) with use count 1
> Unable to handle kernel paging request at virtual address 7f4fb7f8
> pgd = bd094000
> [7f4fb7f8] *pgd=4cb66811, *pte=00000000, *ppte=00000000
> Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
>
> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
> Signed-off-by: Sandeep Jain <Sandeep_Jain@xxxxxxxxxx>
> ---
> drivers/mtd/devices/m25p80.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 9cf7fcd..2eb1530 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -185,6 +185,19 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
> return ret;
> }
>
> +static void m25p80_put(struct mtd_info *mtd)
> +{
> + module_put(THIS_MODULE);
> +}
> +
> +static int m25p80_get(struct mtd_info *mtd)
> +{
> + if (!try_module_get(THIS_MODULE))
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> /*
> * board specific setup should have ensured the SPI clock used here
> * matches what the READ command supports, at least until this driver
> @@ -212,6 +225,8 @@ static int m25p_probe(struct spi_device *spi)
> nor->write = m25p80_write;
> nor->write_reg = m25p80_write_reg;
> nor->read_reg = m25p80_read_reg;
> + nor->mtd._put_device = m25p80_put;
> + nor->mtd._get_device = m25p80_get;
>
> nor->dev = &spi->dev;
> spi_nor_set_flash_node(nor, spi->dev.of_node);
> --
> 1.7.9.5
>