[PATCH 07/14] pinctrl-sx150x: Convert driver to use regmap API

From: Andrey Smirnov
Date: Tue Nov 01 2016 - 12:05:54 EST


To allow for future code simplification

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
drivers/pinctrl/pinctrl-sx150x.c | 102 +++++++++++++++++++++------------------
1 file changed, 56 insertions(+), 46 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
index 9063424..0e7c5fb 100644
--- a/drivers/pinctrl/pinctrl-sx150x.c
+++ b/drivers/pinctrl/pinctrl-sx150x.c
@@ -18,6 +18,7 @@
* GNU General Public License for more details.
*/

+#include <linux/regmap.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -44,6 +45,7 @@ enum {
};
enum {
SX150X_789_REG_MISC_AUTOCLEAR_OFF = 1 << 0,
+ SX150X_MAX_REGISTER = 0xad,
};

struct sx150x_123_pri {
@@ -101,6 +103,7 @@ struct sx150x_pinctrl {
struct pinctrl_desc pinctrl_desc;
struct gpio_chip gpio;
struct irq_chip irq_chip;
+ struct regmap *regmap;
struct {
int update;
u32 sense;
@@ -255,30 +258,6 @@ static const struct sx150x_device_data sx1503q_device_data = {
.npins = 16, /* oscio not available */
};

-static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
-{
- s32 err = i2c_smbus_write_byte_data(client, reg, val);
-
- if (err < 0)
- dev_warn(&client->dev,
- "i2c write fail: can't write %02x to %02x: %d\n",
- val, reg, err);
- return err;
-}
-
-static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
-{
- s32 err = i2c_smbus_read_byte_data(client, reg);
-
- if (err >= 0)
- *val = err;
- else
- dev_warn(&client->dev,
- "i2c read fail: can't read from %02x: %d\n",
- reg, err);
- return err;
-}
-
/*
* These utility functions solve the common problem of locating and setting
* configuration bits. Configuration bits are grouped into registers
@@ -311,30 +290,32 @@ static int sx150x_write_cfg(struct i2c_client *client,
u8 offset, u8 width, u8 reg, u8 val)
{
u8 mask;
- u8 data;
+ unsigned int data;
u8 shift;
int err;
+ struct sx150x_pinctrl *pctl = i2c_get_clientdata(client);

sx150x_find_cfg(offset, width, &reg, &mask, &shift);
- err = sx150x_i2c_read(client, reg, &data);
+ err = regmap_read(pctl->regmap, reg, &data);
if (err < 0)
return err;

data &= ~mask;
data |= (val << shift) & mask;
- return sx150x_i2c_write(client, reg, data);
+ return regmap_write(pctl->regmap, reg, data);
}

static int sx150x_read_cfg(struct i2c_client *client,
u8 offset, u8 width, u8 reg)
{
u8 mask;
- u8 data;
+ unsigned int data;
u8 shift;
int err;
+ struct sx150x_pinctrl *pctl = i2c_get_clientdata(client);

sx150x_find_cfg(offset, width, &reg, &mask, &shift);
- err = sx150x_i2c_read(client, reg, &data);
+ err = regmap_read(pctl->regmap, reg, &data);
if (err < 0)
return err;

@@ -462,11 +443,10 @@ static void sx150x_gpio_set(struct gpio_chip *chip, unsigned int offset,
struct sx150x_pinctrl *pctl = gpiochip_get_data(chip);

if (sx150x_pin_is_oscio(pctl, offset)) {
-
mutex_lock(&pctl->lock);
- sx150x_i2c_write(pctl->client,
- pctl->data->pri.x789.reg_clock,
- (value ? 0x1f : 0x10));
+ regmap_write(pctl->regmap,
+ pctl->data->pri.x789.reg_clock,
+ (value ? 0x1f : 0x10));
mutex_unlock(&pctl->lock);
} else {
mutex_lock(&pctl->lock);
@@ -566,19 +546,19 @@ static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
unsigned int sub_irq;
unsigned int n;
s32 err;
- u8 val;
+ unsigned int val;
int i;

for (i = (pctl->data->ngpios / 8) - 1; i >= 0; --i) {
- err = sx150x_i2c_read(pctl->client,
- pctl->data->reg_irq_src - i,
- &val);
+ err = regmap_read(pctl->regmap,
+ pctl->data->reg_irq_src - i,
+ &val);
if (err < 0)
continue;

- err = sx150x_i2c_write(pctl->client,
- pctl->data->reg_irq_src - i,
- val);
+ err = regmap_write(pctl->regmap,
+ pctl->data->reg_irq_src - i,
+ val);
if (err < 0)
continue;

@@ -649,15 +629,15 @@ static int sx150x_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
u32 arg;

if (sx150x_pin_is_oscio(pctl, pin)) {
- u8 data;
+ unsigned int data;

switch (param) {
case PIN_CONFIG_DRIVE_PUSH_PULL:
case PIN_CONFIG_OUTPUT:
mutex_lock(&pctl->lock);
- ret = sx150x_i2c_read(pctl->client,
- pctl->data->pri.x789.reg_clock,
- &data);
+ ret = regmap_read(pctl->regmap,
+ pctl->data->pri.x789.reg_clock,
+ &data);
mutex_unlock(&pctl->lock);

if (ret < 0)
@@ -894,7 +874,7 @@ static int sx150x_init_io(struct sx150x_pinctrl *pctl, u8 base, u16 cfg)
unsigned int n;

for (n = 0; err >= 0 && n < (pctl->data->ngpios / 8); ++n)
- err = sx150x_i2c_write(pctl->client, base - n, cfg >> (n * 8));
+ err = regmap_write(pctl->regmap, base - n, cfg >> (n * 8));
return err;
}

@@ -943,7 +923,7 @@ static int sx150x_init_misc(struct sx150x_pinctrl *pctl)
return -EINVAL;
}

- return sx150x_i2c_write(pctl->client, reg, value);
+ return i2c_smbus_write_byte_data(pctl->client, reg, value);
}

static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
@@ -987,6 +967,26 @@ static int sx150x_init_hw(struct sx150x_pinctrl *pctl)
return 0;
}

+static bool sx150x_reg_volatile(struct device *dev, unsigned int reg)
+{
+ struct sx150x_pinctrl *pctl = i2c_get_clientdata(to_i2c_client(dev));
+
+ return reg == pctl->data->reg_irq_src ||
+ reg == pctl->data->reg_irq_src - 1 ||
+ reg == pctl->data->reg_data ||
+ reg == pctl->data->reg_data - 1;
+}
+
+const struct regmap_config sx150x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .cache_type = REGCACHE_RBTREE,
+
+ .max_register = SX150X_MAX_REGISTER,
+ .volatile_reg = sx150x_reg_volatile,
+};
+
static int sx150x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1006,10 +1006,20 @@ static int sx150x_probe(struct i2c_client *client,
if (!pctl)
return -ENOMEM;

+ i2c_set_clientdata(client, pctl);
+
pctl->dev = dev;
pctl->client = client;
pctl->data = (void *)id->driver_data;

+ pctl->regmap = devm_regmap_init_i2c(client, &sx150x_regmap_config);
+ if (IS_ERR(pctl->regmap)) {
+ ret = PTR_ERR(pctl->regmap);
+ dev_err(dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
mutex_init(&pctl->lock);

ret = sx150x_init_hw(pctl);
--
2.5.5