[PATCH V7 2/4] dmaengine: qcom_hidma: bring out interrupt cause

From: Sinan Kaya
Date: Fri Oct 21 2016 - 12:38:29 EST


Bring out the interrupt cause to the top level so that MSI interrupts
can be hooked at a later stage.

Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
---
drivers/dma/qcom/hidma_ll.c | 62 ++++++++++++++++++++++++---------------------
1 file changed, 33 insertions(+), 29 deletions(-)

diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 114409e..9193f46 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -418,12 +418,24 @@ static int hidma_ll_reset(struct hidma_lldev *lldev)
* requests traditionally to the destination, this concept does not apply
* here for this HW.
*/
-irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
{
- struct hidma_lldev *lldev = arg;
- u32 status;
- u32 enable;
- u32 cause;
+ if (cause & HIDMA_ERR_INT_MASK) {
+ dev_err(lldev->dev, "error 0x%x, disabling...\n",
+ cause);
+
+ /* Clear out pending interrupts */
+ writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+
+ /* No further submissions. */
+ hidma_ll_disable(lldev);
+
+ /* Driver completes the txn and intimates the client.*/
+ hidma_cleanup_pending_tre(lldev, 0xFF,
+ HIDMA_EVRE_STATUS_ERROR);
+
+ return;
+ }

/*
* Fine tuned for this HW...
@@ -432,35 +444,28 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
* read and write accessors are used for performance reasons due to
* interrupt delivery guarantees. Do not copy this code blindly and
* expect that to work.
+ *
+ * Try to consume as many EVREs as possible.
*/
+ hidma_handle_tre_completion(lldev);
+
+ /* We consumed TREs or there are pending TREs or EVREs. */
+ writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+}
+
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+ struct hidma_lldev *lldev = arg;
+ u32 status;
+ u32 enable;
+ u32 cause;
+
status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
cause = status & enable;

while (cause) {
- if (cause & HIDMA_ERR_INT_MASK) {
- dev_err(lldev->dev, "error 0x%x, disabling...\n",
- cause);
-
- /* Clear out pending interrupts */
- writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
-
- /* No further submissions. */
- hidma_ll_disable(lldev);
-
- /* Driver completes the txn and intimates the client.*/
- hidma_cleanup_pending_tre(lldev, 0xFF,
- HIDMA_EVRE_STATUS_ERROR);
- goto out;
- }
-
- /*
- * Try to consume as many EVREs as possible.
- */
- hidma_handle_tre_completion(lldev);
-
- /* We consumed TREs or there are pending TREs or EVREs. */
- writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+ hidma_ll_int_handler_internal(lldev, cause);

/*
* Another interrupt might have arrived while we are
@@ -471,7 +476,6 @@ irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
cause = status & enable;
}

-out:
return IRQ_HANDLED;
}

--
1.9.1