[PATCH 50/52] perf c2c: Add man page and credits

From: Arnaldo Carvalho de Melo
Date: Thu Oct 20 2016 - 11:10:48 EST


From: Jiri Olsa <jolsa@xxxxxxxxxx>

Add man page for c2c command and credits to builtin-c2c.c file.

Tested-by: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Signed-off-by: Jiri Olsa <jolsa@xxxxxxxxxx>
Cc: Andi Kleen <andi@xxxxxxxxxxxxxx>
Cc: David Ahern <dsahern@xxxxxxxxx>
Cc: Don Zickus <dzickus@xxxxxxxxxx>
Cc: Joe Mario <jmario@xxxxxxxxxx>
Cc: Namhyung Kim <namhyung@xxxxxxxxxx>
Cc: Peter Zijlstra <a.p.zijlstra@xxxxxxxxx>
Link: http://lkml.kernel.org/n/tip-twbp391v8v9f5idp584hlfov@xxxxxxxxxxxxxx
Signed-off-by: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
---
tools/perf/Documentation/perf-c2c.txt | 276 ++++++++++++++++++++++++++++++++++
tools/perf/builtin-c2c.c | 11 ++
2 files changed, 287 insertions(+)
create mode 100644 tools/perf/Documentation/perf-c2c.txt

diff --git a/tools/perf/Documentation/perf-c2c.txt b/tools/perf/Documentation/perf-c2c.txt
new file mode 100644
index 000000000000..ba2f4de399c3
--- /dev/null
+++ b/tools/perf/Documentation/perf-c2c.txt
@@ -0,0 +1,276 @@
+perf-c2c(1)
+===========
+
+NAME
+----
+perf-c2c - Shared Data C2C/HITM Analyzer.
+
+SYNOPSIS
+--------
+[verse]
+'perf c2c record' [<options>] <command>
+'perf c2c record' [<options>] -- [<record command options>] <command>
+'perf c2c report' [<options>]
+
+DESCRIPTION
+-----------
+C2C stands for Cache To Cache.
+
+The perf c2c tool provides means for Shared Data C2C/HITM analysis. It allows
+you to track down the cacheline contentions.
+
+The tool is based on x86's load latency and precise store facility events
+provided by Intel CPUs. These events provide:
+ - memory address of the access
+ - type of the access (load and store details)
+ - latency (in cycles) of the load access
+
+The c2c tool provide means to record this data and report back access details
+for cachelines with highest contention - highest number of HITM accesses.
+
+The basic workflow with this tool follows the standard record/report phase.
+User uses the record command to record events data and report command to
+display it.
+
+
+RECORD OPTIONS
+--------------
+-e::
+--event=::
+ Select the PMU event. Use 'perf mem record -e list'
+ to list available events.
+
+-v::
+--verbose::
+ Be more verbose (show counter open errors, etc).
+
+-l::
+--ldlat::
+ Configure mem-loads latency.
+
+-k::
+--all-kernel::
+ Configure all used events to run in kernel space.
+
+-u::
+--all-user::
+ Configure all used events to run in user space.
+
+REPORT OPTIONS
+--------------
+-k::
+--vmlinux=<file>::
+ vmlinux pathname
+
+-v::
+--verbose::
+ Be more verbose (show counter open errors, etc).
+
+-i::
+--input::
+ Specify the input file to process.
+
+-N::
+--node-info::
+ Show extra node info in report (see NODE INFO section)
+
+-c::
+--coalesce::
+ Specify sorintg fields for single cacheline display.
+ Following fields are available: tid,pid,iaddr,dso
+ (see COALESCE)
+
+-g::
+--call-graph::
+ Setup callchains parameters.
+ Please refer to perf-report man page for details.
+
+--stdio::
+ Force the stdio output (see STDIO OUTPUT)
+
+--stats::
+ Display only statistic tables and force stdio mode.
+
+--full-symbols::
+ Display full length of symbols.
+
+C2C RECORD
+----------
+The perf c2c record command setup options related to HITM cacheline analysis
+and calls standard perf record command.
+
+Following perf record options are configured by default:
+(check perf record man page for details)
+
+ -W,-d,--sample-cpu
+
+Unless specified otherwise with '-e' option, following events are monitored by
+default:
+
+ cpu/mem-loads,ldlat=30/P
+ cpu/mem-stores/P
+
+User can pass any 'perf record' option behind '--' mark, like (to enable
+callchains and system wide monitoring):
+
+ $ perf c2c record -- -g -a
+
+Please check RECORD OPTIONS section for specific c2c record options.
+
+C2C REPORT
+----------
+The perf c2c report command displays shared data analysis. It comes in two
+display modes: stdio and tui (default).
+
+The report command workflow is following:
+ - sort all the data based on the cacheline address
+ - store access details for each cacheline
+ - sort all cachelines based on user settings
+ - display data
+
+In general perf report output consist of 2 basic views:
+ 1) most expensive cachelines list
+ 2) offsets details for each cacheline
+
+For each cacheline in the 1) list we display following data:
+(Both stdio and TUI modes follow the same fields output)
+
+ Index
+ - zero based index to identify the cacheline
+
+ Cacheline
+ - cacheline address (hex number)
+
+ Total records
+ - sum of all cachelines accesses
+
+ Rmt/Lcl Hitm
+ - cacheline percentage of all Remote/Local HITM accesses
+
+ LLC Load Hitm - Total, Lcl, Rmt
+ - count of Total/Local/Remote load HITMs
+
+ Store Reference - Total, L1Hit, L1Miss
+ Total - all store accesses
+ L1Hit - store accesses that hit L1
+ L1Hit - store accesses that missed L1
+
+ Load Dram
+ - count of local and remote DRAM accesses
+
+ LLC Ld Miss
+ - count of all accesses that missed LLC
+
+ Total Loads
+ - sum of all load accesses
+
+ Core Load Hit - FB, L1, L2
+ - count of load hits in FB (Fill Buffer), L1 and L2 cache
+
+ LLC Load Hit - Llc, Rmt
+ - count of LLC and Remote load hits
+
+For each offset in the 2) list we display following data:
+
+ HITM - Rmt, Lcl
+ - % of Remote/Local HITM accesses for given offset within cacheline
+
+ Store Refs - L1 Hit, L1 Miss
+ - % of store accesses that hit/missed L1 for given offset within cacheline
+
+ Data address - Offset
+ - offset address
+
+ Pid
+ - pid of the process responsible for the accesses
+
+ Tid
+ - tid of the process responsible for the accesses
+
+ Code address
+ - code address responsible for the accesses
+
+ cycles - rmt hitm, lcl hitm, load
+ - sum of cycles for given accesses - Remote/Local HITM and generic load
+
+ cpu cnt
+ - number of cpus that participated on the access
+
+ Symbol
+ - code symbol related to the 'Code address' value
+
+ Shared Object
+ - shared object name related to the 'Code address' value
+
+ Source:Line
+ - source information related to the 'Code address' value
+
+ Node
+ - nodes participating on the access (see NODE INFO section)
+
+NODE INFO
+---------
+The 'Node' field displays nodes that accesses given cacheline
+offset. Its output comes in 3 flavors:
+ - node IDs separated by ','
+ - node IDs with stats for each ID, in following format:
+ Node{cpus %hitms %stores}
+ - node IDs with list of affected CPUs in following format:
+ Node{cpu list}
+
+User can switch between above flavors with -N option or
+use 'n' key to interactively switch in TUI mode.
+
+COALESCE
+--------
+User can specify how to sort offsets for cacheline.
+
+Following fields are available and governs the final
+output fields set for caheline offsets output:
+
+ tid - coalesced by process TIDs
+ pid - coalesced by process PIDs
+ iaddr - coalesced by code address, following fields are displayed:
+ Code address, Code symbol, Shared Object, Source line
+ dso - coalesced by shared object
+
+By default the coalescing is setup with 'pid,tid,iaddr'.
+
+STDIO OUTPUT
+------------
+The stdio output displays data on standard output.
+
+Following tables are displayed:
+ Trace Event Information
+ - overall statistics of memory accesses
+
+ Global Shared Cache Line Event Information
+ - overall statistics on shared cachelines
+
+ Shared Data Cache Line Table
+ - list of most expensive cachelines
+
+ Shared Cache Line Distribution Pareto
+ - list of all accessed offsets for each cacheline
+
+TUI OUTPUT
+----------
+The TUI output provides interactive interface to navigate
+through cachelines list and to display offset details.
+
+For details please refer to the help window by pressing '?' key.
+
+CREDITS
+-------
+Although Don Zickus, Dick Fowles and Joe Mario worked together
+to get this implemented, we got lots of early help from Arnaldo
+Carvalho de Melo, Stephane Eranian, Jiri Olsa and Andi Kleen.
+
+C2C BLOG
+--------
+Check Joe's blog on c2c tool for detailed use case explanation:
+ https://joemario.github.io/blog/2016/09/01/c2c-blog/
+
+SEE ALSO
+--------
+linkperf:perf-record[1], linkperf:perf-mem[1]
diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index 3fc18264d4d1..73973da00b31 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -1,3 +1,14 @@
+/*
+ * This is rewrite of original c2c tool introduced in here:
+ * http://lwn.net/Articles/588866/
+ *
+ * The original tool was changed to fit in current perf state.
+ *
+ * Original authors:
+ * Don Zickus <dzickus@xxxxxxxxxx>
+ * Dick Fowles <fowles@xxxxxxxxxxx>
+ * Joe Mario <jmario@xxxxxxxxxx>
+ */
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/stringify.h>
--
2.7.4