[PATCH 3/3] arm64: dts: uniphier: add CPU clocks and OPP tables for LD20 SoC

From: Masahiro Yamada
Date: Sun Oct 16 2016 - 11:01:08 EST


Add a CPU clock to every CPU node and CPU OPP tables to use the
generic cpufreq driver. All the CPUs in each cluster share the
same OPP table.

Note:
clock-latency-ns (300ns) was calculated based on the CPU-gear switch
sequencer spec; it takes 12 clock cycles on the sequencer running
at 50 MHz, plus a bit additional latency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 84 ++++++++++++++++++++++++
1 file changed, 84 insertions(+)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 6f48e82..0ebcdbb 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -79,28 +79,36 @@
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
+ clocks = <&sys_clk 32>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};

cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
+ clocks = <&sys_clk 32>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};

cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
+ clocks = <&sys_clk 33>;
enable-method = "psci";
+ operating-points-v2 = <&cluster1_opp>;
};

cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
+ clocks = <&sys_clk 33>;
enable-method = "psci";
+ operating-points-v2 = <&cluster1_opp>;
};
};

@@ -109,6 +117,82 @@
method = "smc";
};

+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@666666666 {
+ opp-hz = /bits/ 64 <666667000>;
+ clock-latency-ns = <300>;
+ };
+ opp@733333333 {
+ opp-hz = /bits/ 64 <733334000>;
+ clock-latency-ns = <300>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ clock-latency-ns = <300>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@666666666 {
+ opp-hz = /bits/ 64 <666667000>;
+ clock-latency-ns = <300>;
+ };
+ opp@733333333 {
+ opp-hz = /bits/ 64 <733334000>;
+ clock-latency-ns = <300>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ clock-latency-ns = <300>;
+ };
+ };
+
clocks {
refclk: ref {
compatible = "fixed-clock";
--
1.9.1