[PATCH 3/5] i2c: octeon,thunderx: Fix high-level controller status check

From: Jan Glauber
Date: Wed Sep 21 2016 - 02:51:51 EST


In case the high-level controller (HLC) is used the status code is
reported at a different location. Check that location after HLC
write operations if the ready bit is not set and return an appropriate
error code instead of always returning -EAGAIN.

Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-octeon-core.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
index 7d4df83..5e63b17 100644
--- a/drivers/i2c/busses/i2c-octeon-core.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -215,7 +215,16 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)

static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
{
- u8 stat = octeon_i2c_stat_read(i2c);
+ u8 stat;
+
+ /*
+ * This is ugly... in HLC mode the status is not in the status register
+ * but in the lower 8 bits of SW_TWSI.
+ */
+ if (i2c->hlc_enabled)
+ stat = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+ else
+ stat = octeon_i2c_stat_read(i2c);

switch (stat) {
/* Everything is fine */
@@ -453,7 +462,7 @@ static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)

cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
+ return octeon_i2c_check_status(i2c, false);

for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
@@ -506,9 +515,7 @@ static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)

cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- ret = octeon_i2c_check_status(i2c, false);
+ return octeon_i2c_check_status(i2c, false);

err:
return ret;
@@ -553,7 +560,7 @@ static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs

cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
+ return octeon_i2c_check_status(i2c, false);

for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
@@ -617,9 +624,7 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg

cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- ret = octeon_i2c_check_status(i2c, false);
+ return octeon_i2c_check_status(i2c, false);

err:
return ret;
--
1.9.1