Re: [PATCH v2 4/7] dts: sun8i-h3: add UART1-3 to Orange Pi Plus

From: Maxime Ripard
Date: Tue Sep 06 2016 - 16:02:07 EST


On Tue, Sep 06, 2016 at 11:04:38AM +0800, Chen-Yu Tsai wrote:
> On Tue, Sep 6, 2016 at 3:31 AM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > Hi Jorik,
> >
> > On Sat, Sep 03, 2016 at 02:09:32PM +0200, Jorik Jonker wrote:
> >> On Fri, Sep 02, 2016 at 09:04:25AM +0200, Maxime Ripard wrote:
> >> >Unfortunately, these pins can be used for other purposes as well, so
> >> >we cannot make force that decision down to our users.
> >>
> >> Yes, but since the associated peripheral is disabled, the users are free to
> >> configure other functions/peripherals, right? I mean something like this in
> >> pseudo-DT:
> >>
> >> /soc/pio: pinctrl@01c20800/uart1_pins:
> >> allwinner,pins = "PG6, PG7";
> >> /soc/pio: pinctrl@01c20800/foo0_pins:
> >> allwinner,pins = "PG6, PG7";
> >> ..
> >> /soc/uart1: serial@serial@01c28400:
> >> pinctrl-0 = <&uart1_pins>;
> >> status = "disabled";
> >> /soc/bar:
> >> pinctrl-0 = <&uart1_pins>;
> >> status = "disabled";
> >>
> >> Assuming Linux/DT allows this, this would force nothing, only offer choice
> >> and ease of use.
> >
> > Hmm, sorry, I went over your patches too quickly...
> >
> > That's a great compromise I think. Chen-Yu, any opinion on this?
>
> In short, I'm ok with it. But please put an explicit
>
> status = "disabled";
>
> and probably a comment about how/where the peripheral can be
> used in the board dts.
>
> I intended to do this for the Banana Pis. Though my original plan
> was to enable Raspberry Pi compatible peripherals by default, and
> list the other peripherals that are defined by the vendor as
> "disabled".
>
> "Defined by the vendor" means that the vendor has some sort of
> document associating the gpio header pins with the peripherals,
> as shown in:
>
> http://www.orangepi.org/Docs/Pindefinition.html#CON3_Definition
>
> This should make it easier for the average user to enable the
> peripherals. I'm not sure we should list _all_ possible ones
> though. That would make the list very large, and some might
> end up never being used.

Having a clear limit on what we can put and what we can't isn't very
easy to do though. Any suggestion on how we can solve that?

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature