Re: [PATCH v7 3/4] usb: dwc2: assert phy reset when waking up in rk3288 platform

From: John Youn
Date: Tue Sep 06 2016 - 14:54:48 EST


On 9/5/2016 10:15 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Sunday 04 September 2016 03:25 AM, Randy Li wrote:
>> On the rk3288 USB host-only port (the one that's not the OTG-enabled
>> port) the PHY can get into a bad state when a wakeup is asserted (not
>> just a wakeup from full system suspend but also a wakeup from
>> autosuspend).
>>
>> We can get the PHY out of its bad state by asserting its "port reset",
>> but unfortunately that seems to assert a reset onto the USB bus so it
>> could confuse things if we don't actually deenumerate / reenumerate the
>> device.
>>
>> We can also get the PHY out of its bad state by fully resetting it using
>> the reset from the CRU (clock reset unit) in chip, which does a more full
>> reset. The CRU-based reset appears to actually cause devices on the bus
>> to be removed and reinserted, which fixes the problem (albeit in a hacky
>> way).
>>
>> It's unfortunate that we need to do a full re-enumeration of devices at
>> wakeup time, but this is better than alternative of letting the bus get
>> wedged.
>>
>> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
>> ---
>> drivers/usb/dwc2/core_intr.c | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
>> index d85c5c9..08485b7 100644
>> --- a/drivers/usb/dwc2/core_intr.c
>> +++ b/drivers/usb/dwc2/core_intr.c
>> @@ -345,6 +345,7 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
>> static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
>> {
>> int ret;
>> + struct device_node *np = hsotg->dev->of_node;
>>
>> /* Clear interrupt */
>> dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
>> @@ -379,6 +380,17 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
>> /* Restart the Phy Clock */
>> pcgcctl &= ~PCGCTL_STOPPCLK;
>> dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
>> +
>> + /*
>> + * It is a quirk in Rockchip RK3288, causing by
>> + * a hardware bug. This will propagate out and
>> + * eventually we'll re-enumerate the device.
>> + * Not great but the best we can do
>> + */
>> + if (of_device_is_compatible(np, "rockchip,rk3288-usb")
>> + && (NULL != hsotg->phy->ops->reset))
>> + hsotg->phy->ops->reset(hsotg->phy);
>
> never call the phy ops directly from the controller driver. It has to be
> protected as well.

It looks like we should be calling an API function instead, correct?

Similar to the wrappers for the other ops.

Regards,
John