Re: [PATCH 0/5 v2] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal support

From: Geert Uytterhoeven
Date: Mon Sep 05 2016 - 06:08:37 EST


Hi Khiem

On Sat, Sep 3, 2016 at 7:22 AM, Khiem Nguyen
<khiem.nguyen.xt@xxxxxxxxxxx> wrote:
> This patchset adds new thermal sensor driver to support 3 sensors found in R-Car Gen3 series.
>
> It has been decided to create new driver, instead of using the existing thermal driver
> due to many differences in HW setting flows, the method to calculate temperatures value
> and some newly supported features.
>
> The new driver can support both polling mode and interrupt mode.
> It has been tested with R-Car H3. I expect same result on R-Car M3.
>
> This driver is developed based on early work of Hien Dang and Thao Nguyen.
> All comments are welcome.

You forgot to CC Simon Horman and the linux-renesas-soc mailing list.

> Khiem Nguyen (5):
> thermal: rcar_gen3_thermal: Document the R-Car Gen3 thermal bindings
> thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver support
> arm64: dts: r8a7795: Add R-Car Gen3 thermal support
> arm64: dts: r8a7796: Add R-Car Gen3 thermal support
> arm64: defconfig: Enable R-Car Gen3 thermal support
>
> .../bindings/thermal/rcar-gen3-thermal.txt | 79 +++
> arch/arm64/boot/dts/renesas/r8a7795.dtsi | 83 ++++
> arch/arm64/boot/dts/renesas/r8a7796.dtsi | 83 ++++
> arch/arm64/configs/defconfig | 2 +
> drivers/thermal/Kconfig | 9 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/rcar_gen3_thermal.c | 539 +++++++++++++++++++++
> 7 files changed, 796 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
> create mode 100644 drivers/thermal/rcar_gen3_thermal.c

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds