[PATCH 0/6] MIPS: Remote processor driver

From: Matt Redfearn
Date: Fri Sep 02 2016 - 06:01:11 EST



The MIPS remote processor driver allows non-Linux firmware to take
control of and execute on one of the systems VPEs. The CPU must be
offlined from Linux first. A sysfs interface is created which allows
firmware to be loaded and changed at runtime. A full description is
available at [1]. An example firmware that can be used with this driver
is available at [2].

This is useful to allow running bare metal code, or an RTOS, on one or
more CPUs while allowing Linux to continue running on those remaining.

The remote processor framework allows for firmwares to provide any
virtio device for communication between the firmware running on the
remote VPE and Linux. For example [2] demonstrates a simple firmware
which provides a virtual serial port. Any string sent to the port is
case inverted and returned.

This is conceptually similar to the VPE loader functionality, but is
more standard as it fits into the remoteproc subsystem.

The first patches in this series lay the groundwork for the driver
before it is added. The last series deprecates the VPE loader.

This functionality is supported on:
- MIPS32r2 devices implementing the MIPS MT ASE for multithreading, such
as interAptiv.
- MIPS32r6 devices implementing VPs, such as I6400.

Limitations:
- The remoteproc core supports only 32bit ELFs. Therefore it is only
possible to run 32bit firmware on the remote processor. Also, for
virtio communication, pointers are passed from the kernel to firmware.
There can be no mismatch in pointer sizes between the kernel and
firmware, so this limits the host kernel to 32bit as well.

The functionality has been tested on the Ci40 board which has a 2 core 2
thread interAptiv.

This series is based on v4.8-rc4.

Depends on some patches from James Hogan's recent "MIPS: General EVA fixes &
cleanups" series:
MIPS: traps: 64bit kernels should read CP0_EBase 64bit
MIPS: traps: Convert ebase to KSeg0
MIPS: traps: Ensure full EBase is written

Without these patches, if firmware modifies ebase to allow handling
exceptions / interrupts, then when the VPE is returned to Linux the
kernel exception handlers won't be reinstated properly.

[1] http://wiki.prplfoundation.org/w/images/d/df/MIPS_OS_Remote_Processor_Driver_Whitepaper_1.0.9.pdf
[2] https://github.com/MIPS/mips-rproc-example



Lisa Parratt (1):
MIPS: CPS: Add VP(E) stealing

Matt Redfearn (5):
irqchip: mips-gic: Add context saving for MIPS_REMOTEPROC
MIPS: tlb-r4k: If there are wired entries, don't use TLBINVF
MIPS: smp.c: Introduce mechanism for freeing and allocating IPIs
remoteproc/MIPS: Add a remoteproc driver for MIPS
MIPS: Deprecate VPE Loader

Documentation/ABI/testing/sysfs-class-mips-rproc | 24 +
arch/mips/Kconfig | 12 +-
arch/mips/include/asm/smp-cps.h | 8 +
arch/mips/include/asm/smp.h | 15 +
arch/mips/kernel/smp-cps.c | 162 +++++-
arch/mips/kernel/smp.c | 73 ++-
arch/mips/mm/tlb-r4k.c | 7 +-
drivers/irqchip/irq-mips-gic.c | 185 ++++++-
drivers/remoteproc/Kconfig | 11 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/mips_remoteproc.c | 651 +++++++++++++++++++++++
11 files changed, 1124 insertions(+), 25 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-mips-rproc
create mode 100644 drivers/remoteproc/mips_remoteproc.c

--
2.7.4