Re: [PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF

[Code Kipper]

On 30 July 2016 at 17:17, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Sat, Jul 30, 2016 at 04:27:15PM +0200, codekipper@xxxxxxxxx wrote:
>> From: Marcus Cooper <codekipper@xxxxxxxxx>
>>
>> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
>> reset is controlled via a separate reset controller.
>>
>> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
>> ---
>>  Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> index 13503aa..4fe80f7 100644
>> --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
>> @@ -9,6 +9,7 @@ Required properties:
>>
>>    - compatible               : should be one of the following:
>>      - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
>> +    - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
>>
>>    - reg                      : Offset and length of the register set for the device.
>>
>> @@ -25,6 +26,8 @@ Required properties:
>>       "apb"             clock for the spdif bus.
>>       "spdif"           clock for spdif controller.
>>
>> +  - reset            : reset specifier for the ahb reset (A31 and newer only)
>
> Isn't it resets ? (plural)

Dohh..yes it is. Do you want me to send an updated patch series, a
single patch change or could I beg for your commit massaging?
Thanks,
CK
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com