[PATCH 05/10] coresight: etm4x: cleaning up default filter configuration

From: Mathieu Poirier
Date: Mon Jul 18 2016 - 15:53:49 EST


The default filter configuration was hard to read and included
some redundancy. This patch attempts to stream line configuration
and improve readability.

No change of functionality is included.

Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 53 ++++++++++++++-------------
1 file changed, 27 insertions(+), 26 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 9978cf7a5600..e348c18086f5 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -586,39 +586,34 @@ static void etm4_set_default_config(struct etmv4_config *config)

static void etm4_set_default_filter(struct etmv4_config *config)
{
- /*
- * TRCVICTLR::SSSTATUS == 1, the start-stop logic is
- * in the started state
- */
- config->vinst_ctrl |= BIT(9);
+ u64 start, stop, access_type = 0;

/*
* Configure address range comparator '0' to encompass all
* possible addresses.
*/
+ start = 0x0;
+ stop = ~0x0;

- /* First half of default address comparator: start at address 0 */
- config->addr_val[ETM_DEFAULT_ADDR_COMP] = 0x0;
- /* trace instruction addresses */
- config->addr_acc[ETM_DEFAULT_ADDR_COMP] &= ~(BIT(0) | BIT(1));
- /* EXLEVEL_NS, bits[12:15], only trace application and kernel space */
- config->addr_acc[ETM_DEFAULT_ADDR_COMP] |= ETM_EXLEVEL_NS_HYP;
- /* EXLEVEL_S, bits[11:8], don't trace anything in secure state */
- config->addr_acc[ETM_DEFAULT_ADDR_COMP] |= (ETM_EXLEVEL_S_APP |
- ETM_EXLEVEL_S_OS |
- ETM_EXLEVEL_S_HYP);
- config->addr_type[ETM_DEFAULT_ADDR_COMP] = ETM_ADDR_TYPE_RANGE;
+ /* EXLEVEL_NS, bits[12:15], always stay away from hypervisor mode. */
+ access_type = ETM_EXLEVEL_NS_HYP;

/*
- * Second half of default address comparator: go all
- * the way to the top.
- */
- config->addr_val[ETM_DEFAULT_ADDR_COMP + 1] = ~0x0;
- /* trace instruction addresses */
- config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] &= ~(BIT(0) | BIT(1));
- /* Address comparator type must be equal for both halves */
- config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] =
- config->addr_acc[ETM_DEFAULT_ADDR_COMP];
+ * EXLEVEL_S, bits[11:8], don't trace anything happening
+ * in secure state.
+ */
+ access_type |= (ETM_EXLEVEL_S_APP |
+ ETM_EXLEVEL_S_OS |
+ ETM_EXLEVEL_S_HYP);
+
+ /* First half of default address comparator */
+ config->addr_val[ETM_DEFAULT_ADDR_COMP] = start;
+ config->addr_acc[ETM_DEFAULT_ADDR_COMP] = access_type;
+ config->addr_type[ETM_DEFAULT_ADDR_COMP] = ETM_ADDR_TYPE_RANGE;
+
+ /* Second half of default address comparator */
+ config->addr_val[ETM_DEFAULT_ADDR_COMP + 1] = stop;
+ config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = access_type;
config->addr_type[ETM_DEFAULT_ADDR_COMP + 1] = ETM_ADDR_TYPE_RANGE;

/*
@@ -627,7 +622,13 @@ static void etm4_set_default_filter(struct etmv4_config *config)
*/
config->viiectlr = BIT(0);

- /* no start-stop filtering for ViewInst */
+ /*
+ * TRCVICTLR::SSSTATUS == 1, the start-stop logic is
+ * in the started state
+ */
+ config->vinst_ctrl |= BIT(9);
+
+ /* No start-stop filtering for ViewInst */
config->vissctlr = 0x0;
}

--
2.7.4